暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-Pin SODIMM for POSIFLEX RT-6016-G2 memory upgrade

SKU CH-687B-HD0M0

16 GB DDR4-3200 CL22 SODIMM module upgrades POSIFLEX RT-6016-G2 terminals with 1.2 V, 2Rx8 unbuffered memory

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 boosts terminal responsiveness
  • CL22 latency and 1.2 V keep power draw low
  • 2Rx8 rank on 260-pin SODIMM fits the RT-6016-G2 slot
  • Major OEM Samsung, Micron, Hynix chips deliver reliable operation
  • Non-ECC unbuffered design matches POS system requirements

NEMIX RAM 16GB DDR4 SODIMM for POSIFLEX RT-6016-G2

This 16GB DDR4 3200 SODIMM is built specifically for the POSIFLEX RT-6016-G2 terminal. It runs at 1.2V with CL22 latency and uses a 2Rx8 rank configuration on a 260-pin unbuffered module. The part number MS25600-628K1 confirms exact compatibility.

Who this suits and who should look elsewhere

Technicians upgrading a POSIFLEX RT-6016-G2 terminal will find the correct form factor and validated timings in this single module. Buyers who need ECC error correction, registered buffering, a different voltage, or a higher capacity per slot cannot use this part.

The specification that decides fit

The module must be a 260-pin DDR4 SODIMM rated for PC4-25600 at 1.2V with CL22 CAS latency. If the target system requires a different pin count, voltage, speed grade, or latency, this memory will not function correctly.

特長

  • 16 GB DDR4 3200 boosts terminal responsiveness
  • CL22 latency and 1.2 V keep power draw low
  • 2Rx8 rank on 260-pin SODIMM fits the RT-6016-G2 slot
  • Major OEM Samsung, Micron, Hynix chips deliver reliable operation
  • Non-ECC unbuffered design matches POS system requirements

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

How can I confirm the 16 GB DDR4 3200 module is running at CL22 after installation?

Open Task Manager, select the Performance tab, click Memory and verify the speed shows 3200 MHz; then use CPU-Z or HWiNFO to check that the CAS latency reads 22 cycles.

What is included in the package and what extra parts are required?

The box contains one 16 GB 260-pin DDR4 SODIMM (part MS25600-628K1); no tools, cables or additional modules are needed for the POSIFLEX RT-6016-G2 slot.

Which version should I choose for the POSIFLEX RT-6016-G2 terminal?

Select the 16 GB DDR4 3200 CL22 260-pin SODIMM (MS25600-628K1) — it matches the terminal’s voltage, rank and pin layout exactly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。