暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black chips, no heat spreader, 288 gold pins, DDR5 UDIMM module

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V 288-pin UDIMM memory upgrade for QNAP TS-H1277AXU-RP

SKU CH-20V3-X6FBY

16 GB DDR5 module at 4800 MHz, CL40, 1.1 V, 288-pin UDIMM for QNAP TS-H1277AXU-RP NAS

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 16GB

  • 16 GB DDR5 4800 MHz adds responsive capacity for QNAP TS-H1277AXU-RP NAS
  • CL40 CAS latency keeps data access tight under sustained workloads
  • 1 V operation reduces power draw and heat in dense enclosures
  • 1Rx8 single-rank layout simplifies memory controller timing
  • 288-pin UDIMM form factor fits the validated QNAP slot exactly

16 GB DDR5 4800 module for QNAP TS-H1277AXU-RP

This 288-pin UDIMM delivers 16 GB of DDR5 memory at 4800 MT/s with CL40 latency and 1.10 V operation. It is built as a single-rank 1Rx8 unbuffered non-ECC module using major OEM DRAM chips. The stick is validated specifically for the QNAP TS-H1277AXU-RP NAS platform.

Suits administrators expanding that exact NAS model

Buyers who need ECC error correction should look elsewhere because this module is non-ECC. Systems requiring registered or buffered DIMMs cannot use this unbuffered design. Anyone targeting a different motherboard or NAS chassis must verify compatibility independently.

Single module supplied without heat spreader

The package contains only the 16 GB UDIMM itself; no additional brackets, cables or software licences are included. Installation relies on the standard DIMM slots of the host system. The bare PCB keeps the profile low for tight NAS enclosures.

特長

  • 16 GB DDR5 4800 MHz adds responsive capacity for QNAP TS-H1277AXU-RP NAS
  • CL40 CAS latency keeps data access tight under sustained workloads
  • 1 V operation reduces power draw and heat in dense enclosures
  • 1Rx8 single-rank layout simplifies memory controller timing
  • 288-pin UDIMM form factor fits the validated QNAP slot exactly

仕様

BrandNEMIX RAM
SeriesQNAP NAS Compatible Series Memory
ModelQNAP DDR5 4800MHZ Non-ECC Unbuffered UDIMM NAS Memory
Part NumberMD38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemQnap
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

My QNAP TS-H1277AXU-RP has four DDR5 slots — can I add this single 16 GB stick to the modules already installed?

Yes, the module is a standard 288-pin DDR5 UDIMM, so it fits any empty slot; the NAS will run all populated slots at the lowest common speed and latency.

The NAS currently runs DDR5 at 4800 MHz CL40 — will this stick match those timings without manual BIOS changes?

The stick is rated 4800 MHz CL40 at 1.10 V, exactly the same JEDEC profile the system uses by default, so it will operate at those settings automatically.

After installation, how can I confirm the new 16 GB module is recognised and running at 4800 MHz?

Open the QNAP web interface, go to System Information → Hardware, and verify the total memory shows the added 16 GB and the memory speed reads 4800 MHz.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。