我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black chips, no heat spreader, 288 gold pins, DDR5 UDIMM module

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V 288-pin UDIMM memory upgrade for QNAP TS-H1277AXU-RP

SKU CH-20V3-X6FBY

16 GB DDR5 module at 4800 MHz, CL40, 1.1 V, 288-pin UDIMM for QNAP TS-H1277AXU-RP NAS

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 16GB

  • 16 GB DDR5 4800 MHz adds responsive capacity for QNAP TS-H1277AXU-RP NAS
  • CL40 CAS latency keeps data access tight under sustained workloads
  • 1 V operation reduces power draw and heat in dense enclosures
  • 1Rx8 single-rank layout simplifies memory controller timing
  • 288-pin UDIMM form factor fits the validated QNAP slot exactly

16 GB DDR5 4800 module for QNAP TS-H1277AXU-RP

This 288-pin UDIMM delivers 16 GB of DDR5 memory at 4800 MT/s with CL40 latency and 1.10 V operation. It is built as a single-rank 1Rx8 unbuffered non-ECC module using major OEM DRAM chips. The stick is validated specifically for the QNAP TS-H1277AXU-RP NAS platform.

Suits administrators expanding that exact NAS model

Buyers who need ECC error correction should look elsewhere because this module is non-ECC. Systems requiring registered or buffered DIMMs cannot use this unbuffered design. Anyone targeting a different motherboard or NAS chassis must verify compatibility independently.

Single module supplied without heat spreader

The package contains only the 16 GB UDIMM itself; no additional brackets, cables or software licences are included. Installation relies on the standard DIMM slots of the host system. The bare PCB keeps the profile low for tight NAS enclosures.

商品特色

  • 16 GB DDR5 4800 MHz adds responsive capacity for QNAP TS-H1277AXU-RP NAS
  • CL40 CAS latency keeps data access tight under sustained workloads
  • 1 V operation reduces power draw and heat in dense enclosures
  • 1Rx8 single-rank layout simplifies memory controller timing
  • 288-pin UDIMM form factor fits the validated QNAP slot exactly

商品規格

BrandNEMIX RAM
SeriesQNAP NAS Compatible Series Memory
ModelQNAP DDR5 4800MHZ Non-ECC Unbuffered UDIMM NAS Memory
Part NumberMD38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemQnap
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

My QNAP TS-H1277AXU-RP has four DDR5 slots — can I add this single 16 GB stick to the modules already installed?

Yes, the module is a standard 288-pin DDR5 UDIMM, so it fits any empty slot; the NAS will run all populated slots at the lowest common speed and latency.

The NAS currently runs DDR5 at 4800 MHz CL40 — will this stick match those timings without manual BIOS changes?

The stick is rated 4800 MHz CL40 at 1.10 V, exactly the same JEDEC profile the system uses by default, so it will operate at those settings automatically.

After installation, how can I confirm the new 16 GB module is recognised and running at 4800 MHz?

Open the QNAP web interface, go to System Information → Hardware, and verify the total memory shows the added 16 GB and the memory speed reads 4800 MHz.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。