暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 4800MHz PC5-38400 CL40 1Rx8 1.1V 288-Pin UDIMM memory upgrade for Supermicro X14SAE

SKU CH-GG5V-2HSVN

16 GB DDR5 4800 MHz CL40 UDIMM built for the Supermicro X14SAE motherboard

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Size 16GB

  • 16 GB DDR5 4800 MHz capacity for responsive multitasking
  • CL40 latency at 1.1 V for stable rated-speed operation
  • 1Rx8 single-rank unbuffered layout matches controller expectations
  • Built with Samsung Micron Hynix OEM chips for tested reliability
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

Exact-match DDR5 upgrade for Supermicro X14SAE

This 16 GB DDR5-4800 module is built to the precise rank, voltage and timing the Supermicro X14SAE memory controller expects. It installs as a 288-pin UDIMM and is recognised at full capacity and rated speed without manual tuning.

16 GB single-rank capacity and PC5-38400 bandwidth

The 1Rx8 organisation delivers 16 GB in one slot, leaving three additional DIMM slots free for future expansion on the X14SAE. Bandwidth tops out at the JEDEC-standard 38400 MT/s, so workloads that exceed this throughput will need faster modules or additional channels.

Low-voltage operation with no heat spreader

Rated at 1.1 V, the module draws minimal power and runs cool enough to operate without a heat spreader in typical chassis airflow. The unbuffered design adds negligible latency, and the absence of ECC keeps the data path simple for desktop workloads.

特長

  • 16 GB DDR5 4800 MHz capacity for responsive multitasking
  • CL40 latency at 1.1 V for stable rated-speed operation
  • 1Rx8 single-rank unbuffered layout matches controller expectations
  • Built with Samsung Micron Hynix OEM chips for tested reliability
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 16GB DDR5 4800MHz module work in the same Supermicro X14SAE board alongside my existing DDR5 memory?

The module is spec-matched to the X14SAE with 288-pin UDIMM form factor, 1.1V operation, CL40 timing and 1Rx8 rank, so it will be recognised at full capacity and run at its rated 4800MHz speed when installed per the board's population rules.

How can I verify the module is running at 4800MHz with CL40 after installation?

Check the memory speed and latency in BIOS or a system-information tool; it should report DDR5-4800 (PC5-38400) at 1.1V with CAS latency 40, confirming the rated speed and timing are active.

What comes in the package and do I need anything else to install it?

The box contains one 16GB DDR5 4800MHz 288-pin UDIMM; no heat spreader or extra cables are included, and no additional parts are required beyond a compatible motherboard slot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。