暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X13SAE-F memory upgrade

SKU CH-B0H6-PN6H0

A 16 GB DDR5 5600 MHz CL46 UDIMM built for the Supermicro X13SAE-F motherboard

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 1.1 V for full rated speed
  • Verified fit for Supermicro X13SAE-F 288-pin UDIMM slot
  • Major OEM Samsung Micron Hynix chips tested at rated specs
  • Check manual for supported capacity and DIMM population order
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5 upgrade for Supermicro X13SAE-F

This 16 GB DDR5 5600 module delivers the precise 1Rx8 Non-ECC unbuffered specification the board expects. It installs as a single 288-pin UDIMM at 1.1 V with CL46 timing. Builders expanding a compatible Supermicro desktop platform will have the new capacity recognised immediately at the rated 5600 MT/s speed.

Replaces slower or lower-capacity DDR5 UDIMMs

The jump is worthwhile when the current memory runs below 5600 MT/s or when the system has fewer than 16 GB installed. Matching the exact rank, voltage and timing avoids down-clocking or population errors that mixed modules can cause. Buyers who need ECC registered DIMMs, SODIMM form factors or capacities beyond 16 GB per slot should look elsewhere.

Simple UDIMM installation with standard precautions

Align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, and verify the new capacity in BIOS. Common issues include seating the module incompletely, populating slots in the wrong order per the motherboard manual, or mixing ranks that the board does not support. The kit contains a single DIMM; no heat spreader is included.

特長

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 1.1 V for full rated speed
  • Verified fit for Supermicro X13SAE-F 288-pin UDIMM slot
  • Major OEM Samsung Micron Hynix chips tested at rated specs
  • Check manual for supported capacity and DIMM population order
  • Lifetime replacement warranty with US-based technical support

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin DDR5 UDIMM fit the Supermicro X13SAE-F motherboard slots?

Yes, the module uses the exact 288-pin UDIMM form factor required by the X13SAE-F, so it seats directly in the board's DDR5 slots.

What is the correct installation step for this 1Rx8 module on the X13SAE-F?

Insert the stick into the primary slot indicated in the motherboard manual, press down until both retention clips click, and verify the system posts at 5600 MHz.

Does the lack of a heat spreader mean the 1.1V modules will need active cooling later?

No, DDR5 at 1.1 V and CL46 runs within standard thermal limits; the board's normal airflow is sufficient for the life of the memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。