我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X13SAE-F memory upgrade

SKU CH-B0H6-PN6H0

A 16 GB DDR5 5600 MHz CL46 UDIMM built for the Supermicro X13SAE-F motherboard

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 1.1 V for full rated speed
  • Verified fit for Supermicro X13SAE-F 288-pin UDIMM slot
  • Major OEM Samsung Micron Hynix chips tested at rated specs
  • Check manual for supported capacity and DIMM population order
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5 upgrade for Supermicro X13SAE-F

This 16 GB DDR5 5600 module delivers the precise 1Rx8 Non-ECC unbuffered specification the board expects. It installs as a single 288-pin UDIMM at 1.1 V with CL46 timing. Builders expanding a compatible Supermicro desktop platform will have the new capacity recognised immediately at the rated 5600 MT/s speed.

Replaces slower or lower-capacity DDR5 UDIMMs

The jump is worthwhile when the current memory runs below 5600 MT/s or when the system has fewer than 16 GB installed. Matching the exact rank, voltage and timing avoids down-clocking or population errors that mixed modules can cause. Buyers who need ECC registered DIMMs, SODIMM form factors or capacities beyond 16 GB per slot should look elsewhere.

Simple UDIMM installation with standard precautions

Align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, and verify the new capacity in BIOS. Common issues include seating the module incompletely, populating slots in the wrong order per the motherboard manual, or mixing ranks that the board does not support. The kit contains a single DIMM; no heat spreader is included.

商品特色

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 1.1 V for full rated speed
  • Verified fit for Supermicro X13SAE-F 288-pin UDIMM slot
  • Major OEM Samsung Micron Hynix chips tested at rated specs
  • Check manual for supported capacity and DIMM population order
  • Lifetime replacement warranty with US-based technical support

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 288-pin DDR5 UDIMM fit the Supermicro X13SAE-F motherboard slots?

Yes, the module uses the exact 288-pin UDIMM form factor required by the X13SAE-F, so it seats directly in the board's DDR5 slots.

What is the correct installation step for this 1Rx8 module on the X13SAE-F?

Insert the stick into the primary slot indicated in the motherboard manual, press down until both retention clips click, and verify the system posts at 5600 MHz.

Does the lack of a heat spreader mean the 1.1V modules will need active cooling later?

No, DDR5 at 1.1 V and CL46 runs within standard thermal limits; the board's normal airflow is sufficient for the life of the memory.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。