暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 CL46 1Rx8 1.1V ECC UDIMM Supermicro H13SRD-F/H13SRE-F memory upgrade

SKU CH-V3GY-K495Q

16 GB DDR5-5600 ECC UDIMM, CL46 at 1.1 V, 1Rx8, 288-pin, validated for Supermicro H13SRD-F and H13SRE-F

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

  • Exact DDR5-5600 PC5-44800 match for Supermicro H13SRD-F/H13SRE-F boards
  • ECC corrects single-bit errors to prevent silent data corruption
  • 1Rx8 unbuffered UDIMM fits the board's required form factor and population rules
  • 1 V operation meets the platform's specified voltage for stable performance
  • CL46 CAS latency runs at the rated speed the memory controller expects

Supermicro H13SRD-F memory upgrade

This 16 GB DDR5-5600 module is built specifically for the Supermicro H13SRD-F and H13SRE-F motherboards. It delivers the exact 1Rx8 unbuffered ECC configuration those boards expect so the system recognises the full capacity and runs at the rated speed.

Build quality and daily fit

The stick uses a standard 288-pin UDIMM form factor with no heat spreader, keeping the profile low for dense server chassis. Major-brand Samsung, Micron or Hynix ICs provide the ECC function that detects and corrects single-bit errors on the fly, reducing silent data corruption and unplanned reboots.

What the kit changes

The package contains a single 16 GB DIMM ready to install, letting you expand memory in the precise population order the motherboard manual specifies. Lifetime replacement coverage and free US-based technical support back the upgrade for the life of the system.

特長

  • Exact DDR5-5600 PC5-44800 match for Supermicro H13SRD-F/H13SRE-F boards
  • ECC corrects single-bit errors to prevent silent data corruption
  • 1Rx8 unbuffered UDIMM fits the board's required form factor and population rules
  • 1 V operation meets the platform's specified voltage for stable performance
  • CL46 CAS latency runs at the rated speed the memory controller expects

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR5 5600 interface actually run at on the Supermicro H13SRD-F?

The module is rated for DDR5 5600 (PC5-44800) and will operate at that speed when the motherboard's memory controller supports the specification.

Will the 288-pin unbuffered ECC UDIMM fit the DIMM slots on my H13SRD-F board?

Yes, the 288-pin UDIMM form factor matches the slots required by the Supermicro H13SRD-F and H13SRE-F motherboards.

What is the correct installation order for this 1Rx8 module on the Supermicro motherboard?

Consult the motherboard manual for the approved DIMM population sequence, as the board's memory rules dictate which slot must be populated first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。