NEMIX RAM DDR5 4800 ECC RDIMM 192GB (2x96GB) CL40 1.1V 2Rx4 288-pin memory upgrade
- 192GB (2 x 96GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
192 GB DDR5-4800 ECC registered RDIMM kit (2 × 96 GB, CL40, 1.1 V) validated for the Gigabyte MZ33-AR1 server motherboard
Size 192GB 2X96GB
This 192GB kit delivers two 96GB DDR5-4800 registered ECC modules built to the board's exact rank, voltage and timing requirements. The 2Rx4 organization and 1.10V operation let the memory controller recognize full capacity at rated speed without manual tuning. Server administrators handling virtualization or database workloads get the density they need in a validated form factor.
Registered buffering reduces electrical load on the memory controller so all slots can run fully populated at 4800 MT/s. On-die ECC corrects single-bit errors in real time, preventing silent data corruption that would otherwise crash production services. The kit ships as a matched pair with no heat spreaders, relying on server chassis airflow for thermal management.
The PC5-38400 standard tops out at 4800 MT/s, so workloads needing higher bandwidth must use a platform that supports faster DDR5 speeds. CL40 latency is fixed by the JEDEC base specification and cannot be tightened without modules rated for lower timings. Only motherboards wired for 288-pin RDIMMs with registered ECC support can use this kit; UDIMM or SODIMM systems are physically and electrically incompatible.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | GIGABYTE |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Registered ECC RDIMM modules of this specification are designed for plug-and-play operation in the GIGABYTE MZ33-AR1; no firmware updates or routine reseating are required once they are correctly seated at first install.
The CL40 latency at 4800 MT/s sets the timing ceiling, while the registered buffer and 2Rx4 organisation keep every slot stable at full population without downclocking.
Operating at 1.1V with no heat spreader, the two 96GB RDIMMs rely on server chassis airflow; power draw stays within standard DDR5 RDIMM limits for this voltage and density.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?