We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 4800 CL40 1.1V ECC RDIMM memory upgrade for GIGABYTE MZ33-AR1

SKU CH-QMMC-EKTMY

192 GB DDR5-4800 ECC registered RDIMM kit (2 × 96 GB, CL40, 1.1 V) validated for the Gigabyte MZ33-AR1 server motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Show 18 more configurations
  • 192 GB capacity in a matched 2 x 96 GB kit
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 10 V operation meets the motherboard's voltage spec
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-AR1 slots

Exact-match upgrade for GIGABYTE MZ33-AR1

This 192GB kit delivers two 96GB DDR5-4800 registered ECC modules built to the board's exact rank, voltage and timing requirements. The 2Rx4 organization and 1.10V operation let the memory controller recognize full capacity at rated speed without manual tuning. Server administrators handling virtualization or database workloads get the density they need in a validated form factor.

Registered ECC architecture with 2Rx4 layout

Registered buffering reduces electrical load on the memory controller so all slots can run fully populated at 4800 MT/s. On-die ECC corrects single-bit errors in real time, preventing silent data corruption that would otherwise crash production services. The kit ships as a matched pair with no heat spreaders, relying on server chassis airflow for thermal management.

DDR5-4800 interface practical limits

The PC5-38400 standard tops out at 4800 MT/s, so workloads needing higher bandwidth must use a platform that supports faster DDR5 speeds. CL40 latency is fixed by the JEDEC base specification and cannot be tightened without modules rated for lower timings. Only motherboards wired for 288-pin RDIMMs with registered ECC support can use this kit; UDIMM or SODIMM systems are physically and electrically incompatible.

Highlights

  • 192 GB capacity in a matched 2 x 96 GB kit
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 10 V operation meets the motherboard's voltage spec
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-AR1 slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx4 RDIMM modules need any firmware updates or reseating after installation?

Registered ECC RDIMM modules of this specification are designed for plug-and-play operation in the GIGABYTE MZ33-AR1; no firmware updates or routine reseating are required once they are correctly seated at first install.

What limits sustained throughput when all 192GB are active at DDR5-4800?

The CL40 latency at 4800 MT/s sets the timing ceiling, while the registered buffer and 2Rx4 organisation keep every slot stable at full population without downclocking.

How much heat and power will the kit draw running 24/7 at 1.1V?

Operating at 1.1V with no heat spreader, the two 96GB RDIMMs rely on server chassis airflow; power draw stays within standard DDR5 RDIMM limits for this voltage and density.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.