We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM MR38400-328K4 128GB (4x32GB) DDR5 4800 CL40 ECC RDIMM GIGABYTE MZ33-CP1

SKU CH-H38Q-WA6J5

128GB DDR5-4800 ECC registered RDIMM kit (4×32GB, CL40, 1.1V) validated for GIGABYTE MZ33-CP1 motherboards

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 128 GB total capacity for memory-intensive workloads from four 32 GB modules
  • DDR5-4800 speed with CL40 latency matches the board's rated specification
  • Registered ECC architecture corrects single-bit errors to prevent data corruption
  • 1 V operating voltage reduces power draw at full load
  • Validated for GIGABYTE MZ33-CP1 motherboard to ensure full-slot recognition

Verified DDR5 4800 ECC RDIMM kit

This 128 GB kit contains four 32 GB DDR5 4800 registered ECC modules built to the exact PC5-38400 2Rx8 1.1 V CL40 specification that the Gigabyte MZ33-CP1 memory controller expects. It is intended for administrators upgrading or populating that specific server board with validated memory.

Registered architecture for full population

The registered design offloads the memory controller so every 288-pin slot can run fully populated at rated speed without signal degradation. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots in production workloads.

128 GB capacity with DDR5 headroom

Four dual-rank modules deliver 128 GB of error-corrected capacity for virtualisation, databases or compute clusters running on the MZ33-CP1 platform. The kit stops at the board's supported DDR5 4800 ceiling; workloads needing higher transfer rates or larger per-DIMM densities will require a different platform.

Highlights

  • 128 GB total capacity for memory-intensive workloads from four 32 GB modules
  • DDR5-4800 speed with CL40 latency matches the board's rated specification
  • Registered ECC architecture corrects single-bit errors to prevent data corruption
  • 1 V operating voltage reduces power draw at full load
  • Validated for GIGABYTE MZ33-CP1 motherboard to ensure full-slot recognition

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the CL40 latency become a bottleneck during sustained heavy workloads?

CL40 is the rated CAS latency at DDR5 4800; the registered buffer and ECC logic keep every cycle predictable so the controller never waits longer than specified.

What is the thermal and acoustic impact of four 1.10 V registered DIMMs in a fully populated server?

No heat spreaders are fitted; each module runs at 1.10 V so power draw stays low and the only noise comes from the chassis fans moving air across the bare PCBs.

Which motherboard must already be installed for this 128 GB kit to function as intended?

The kit is validated for the GIGABYTE MZ33-CP1 motherboard; it requires 288-pin DDR5 RDIMM slots that support registered ECC memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.