暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-VPPN-PCYN5

A 192 GB DDR5 kit of four 48 GB registered ECC RDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for Supermicro H14DST-F servers

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

他に 30点の構成を表示
  • 192GB total capacity from four 48GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches controller timing for rated performance
  • 1V operation and 2Rx8 registered ECC architecture offloads the memory controller
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F motherboard fitment
  • Major OEM Samsung Micron Hynix chips provide enterprise-grade reliability and error correction

Server memory kit for Supermicro H14DST-F

This 192 GB kit contains four 48 GB DDR5 RDIMMs built for the Supermicro H14DST-F motherboard. Registered ECC modules provide the error correction and signal buffering that multi-socket servers require for continuous operation. The kit delivers the exact rank structure and voltage the platform expects.

Registered ECC with 2Rx8 organisation

Each module uses a 2Rx8 layout at 1.1 V with CL46 latency and runs at DDR5 5600 (PC5-44800). Registered buffering reduces electrical load on the memory controller so all slots can be populated at rated speed. ECC corrects single-bit errors before they affect data integrity.

Four-slot population at full capacity

The 288-pin RDIMM form factor matches the board's DIMM sockets; UDIMM or SODIMM modules will not fit. Populating all four channels with this kit enables the maximum supported throughput for the platform. Verify the motherboard manual for approved population order before installation.

特長

  • 192GB total capacity from four 48GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches controller timing for rated performance
  • 1V operation and 2Rx8 registered ECC architecture offloads the memory controller
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F motherboard fitment
  • Major OEM Samsung Micron Hynix chips provide enterprise-grade reliability and error correction

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 5600 speed rating mean once the modules are installed in a Supermicro H14DST-F?

The kit runs at DDR5-5600 (PC5-44800) with CL46 latency when the board's memory controller is populated according to its validated population rules.

How does the 288-pin RDIMM interface limit what I can install alongside this kit?

The 288-pin Registered DIMM form factor is required by the H14DST-F; UDIMMs or SODIMMs will not fit or function in these slots.

What physical clearance do the 48GB modules need inside the server chassis?

Each 48GB module is a standard-height 288-pin RDIMM without a heat spreader, so it fits the H14DST-F's DIMM slots without extra vertical clearance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。