暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 256GB (16×16GB) DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14DSG-OM

SKU CH-NA9J-9RJSG

256GB DDR5 6400 ECC RDIMM kit with 16×16GB modules at CL52 and 1.1V for Supermicro H14DSG-OM

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from a 16 × 16 GB kit
  • DDR5 6400 speed with CL52 latency at 1.1 V
  • Registered ECC RDIMM architecture prevents data corruption under load
  • 1Rx8 rank and 288-pin layout match Supermicro H14DSG-OM requirements
  • Lifetime replacement warranty with US-based technical support included

256GB DDR5 6400 ECC RDIMM kit

This 256GB kit contains sixteen 16GB DDR5 6400 registered ECC RDIMMs built for the Supermicro H14DSG-OM motherboard. Each module runs at 1.1V with CL52 latency and a 1Rx8 organisation. The registered design lets the memory controller address every populated slot without signal degradation.

Sustained enterprise workloads

Registered buffering offloads the memory controller so all sixteen slots operate at the rated 6400 speed under continuous load. ECC detects and corrects single-bit errors in real time, preventing silent data corruption during long-running compute or database tasks. The 1.1V operating voltage helps maintain thermal stability across the fully populated array.

Verify motherboard population rules

Check the Supermicro H14DSG-OM manual for approved DIMM population order and maximum supported capacity per channel before ordering. Confirm the board requires 288-pin RDIMMs and not UDIMM or SODIMM form factors. Ensure your BIOS revision supports the full sixteen-module configuration at DDR5 6400.

特長

  • 256 GB total capacity from a 16 × 16 GB kit
  • DDR5 6400 speed with CL52 latency at 1.1 V
  • Registered ECC RDIMM architecture prevents data corruption under load
  • 1Rx8 rank and 288-pin layout match Supermicro H14DSG-OM requirements
  • Lifetime replacement warranty with US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

How much heat and power does the 1.10V DDR5 kit draw when the Supermicro H14DSG-OM runs fully populated all day?

Each 16 GB module operates at 1.10 V with a CL52 1Rx8 registered design, so the memory controller sees a predictable load and the lower DDR5 voltage reduces sustained power draw compared to higher-voltage alternatives.

What motherboard slot type must the Supermicro H14DSG-OM provide for these 288-pin registered DIMMs to be recognised at 256 GB?

The board needs 288-pin DDR5 RDIMM slots; the kit is built to the exact rank, voltage and timing the controller expects, so all sixteen modules register at full capacity and rated 6400 MT/s speed.

Will the CL52 registered ECC modules work alongside older DDR5 RDIMMs still installed in the same system?

Mixing ranks, voltages or timings can prevent the memory controller from training all slots at 6400 MT/s; the manufacturer advises checking the H14DSG-OM manual for approved population rules before combining kits.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。