BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277891BTC
En stock
NEMIX RAM
NEMIX RAM 256GB (16×16GB) DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14DSG-OM
256GB DDR5 6400 ECC RDIMM kit with 16×16GB modules at CL52 and 1.1V for Supermicro H14DSG-OM
- Capacity256GB (16 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity from a 16 × 16 GB kit
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC RDIMM architecture prevents data corruption under load
- 1Rx8 rank and 288-pin layout match Supermicro H14DSG-OM requirements
- Lifetime replacement warranty with US-based technical support included
256GB DDR5 6400 ECC RDIMM kit
This 256GB kit contains sixteen 16GB DDR5 6400 registered ECC RDIMMs built for the Supermicro H14DSG-OM motherboard. Each module runs at 1.1V with CL52 latency and a 1Rx8 organisation. The registered design lets the memory controller address every populated slot without signal degradation.
Sustained enterprise workloads
Registered buffering offloads the memory controller so all sixteen slots operate at the rated 6400 speed under continuous load. ECC detects and corrects single-bit errors in real time, preventing silent data corruption during long-running compute or database tasks. The 1.1V operating voltage helps maintain thermal stability across the fully populated array.
Verify motherboard population rules
Check the Supermicro H14DSG-OM manual for approved DIMM population order and maximum supported capacity per channel before ordering. Confirm the board requires 288-pin RDIMMs and not UDIMM or SODIMM form factors. Ensure your BIOS revision supports the full sixteen-module configuration at DDR5 6400.
Puntos fuertes
- 256 GB total capacity from a 16 × 16 GB kit
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC RDIMM architecture prevents data corruption under load
- 1Rx8 rank and 288-pin layout match Supermicro H14DSG-OM requirements
- Lifetime replacement warranty with US-based technical support included
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 16X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
How much heat and power does the 1.10V DDR5 kit draw when the Supermicro H14DSG-OM runs fully populated all day?
Each 16 GB module operates at 1.10 V with a CL52 1Rx8 registered design, so the memory controller sees a predictable load and the lower DDR5 voltage reduces sustained power draw compared to higher-voltage alternatives.
What motherboard slot type must the Supermicro H14DSG-OM provide for these 288-pin registered DIMMs to be recognised at 256 GB?
The board needs 288-pin DDR5 RDIMM slots; the kit is built to the exact rank, voltage and timing the controller expects, so all sixteen modules register at full capacity and rated 6400 MT/s speed.
Will the CL52 registered ECC modules work alongside older DDR5 RDIMMs still installed in the same system?
Mixing ranks, voltages or timings can prevent the memory controller from training all slots at 6400 MT/s; the manufacturer advises checking the H14DSG-OM manual for approved population rules before combining kits.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00280476BTC
En stock
