暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 5600 ECC RDIMM memory upgrade

SKU CH-TC2V-21D5V

A 256 GB DDR5 registered ECC server memory kit with four 64 GB modules running at 5600 MT/s and CL46 latency

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from four 64 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered design detects and corrects memory errors
  • 1 V operating voltage reduces power draw
  • 288-pin RDIMM form factor fits Supermicro server boards

Capacity and Compatibility

This 256 GB kit contains four 64 GB DDR5 modules built for the SuperMicro B13SEE-CPU-25G motherboard. Registered ECC RDIMM design targets servers and workstations that require error correction and signal integrity. The kit suits IT professionals deploying memory for virtualisation, database or AI workloads on validated Supermicro platforms.

Thermals and Power

Modules operate at 1.10 V without heat spreaders, relying on chassis airflow for cooling. DDR5 5600 speed at CL46 latency runs within standard server power envelopes. Registered buffering reduces electrical load on the memory controller during sustained operation. No active cooling components are included.

Build Integration

The 288-pin RDIMM form factor fits DDR5 slots on the named Supermicro board. Four-module population fills matching channels for maximum bandwidth. ECC and registered features require motherboard support that the target system provides. Builders needing non-ECC memory or desktop form factors should select a different product.

特長

  • 256 GB total capacity from four 64 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered design detects and corrects memory errors
  • 1 V operating voltage reduces power draw
  • 288-pin RDIMM form factor fits Supermicro server boards

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

この商品に関する質問

How do I install the 288-pin DDR5 RDIMM modules in the SuperMicro B13SEE-CPU-25G motherboard, and which step is often missed?

Power down the server, open the chassis, align each 64 GB module's key notch with the slot, press firmly until both retention clips click, then verify in BIOS that all 256 GB are detected at 5600 MT/s; the step often missed is seating all four modules before closing the case, leaving one partially inserted.

What maintenance or replacement will the 2Rx4 ECC registered DIMMs need over time?

No routine maintenance is required; ECC corrects single-bit errors on the fly, but if a module develops uncorrectable errors the system will log the failure and the affected 64 GB stick should be replaced to restore full 256 GB capacity.

What limit appears first when the kit runs sustained workloads at 5600 MT/s and 1.10 V?

The primary limit is thermal — without heat spreaders the Samsung, Micron or Hynix chips rely on chassis airflow, so inadequate cooling will trigger throttling or errors before voltage or timing constraints become an issue.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。