我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 5600 ECC RDIMM memory upgrade

SKU CH-TC2V-21D5V

A 256 GB DDR5 registered ECC server memory kit with four 64 GB modules running at 5600 MT/s and CL46 latency

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from four 64 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered design detects and corrects memory errors
  • 1 V operating voltage reduces power draw
  • 288-pin RDIMM form factor fits Supermicro server boards

Capacity and Compatibility

This 256 GB kit contains four 64 GB DDR5 modules built for the SuperMicro B13SEE-CPU-25G motherboard. Registered ECC RDIMM design targets servers and workstations that require error correction and signal integrity. The kit suits IT professionals deploying memory for virtualisation, database or AI workloads on validated Supermicro platforms.

Thermals and Power

Modules operate at 1.10 V without heat spreaders, relying on chassis airflow for cooling. DDR5 5600 speed at CL46 latency runs within standard server power envelopes. Registered buffering reduces electrical load on the memory controller during sustained operation. No active cooling components are included.

Build Integration

The 288-pin RDIMM form factor fits DDR5 slots on the named Supermicro board. Four-module population fills matching channels for maximum bandwidth. ECC and registered features require motherboard support that the target system provides. Builders needing non-ECC memory or desktop form factors should select a different product.

商品特色

  • 256 GB total capacity from four 64 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered design detects and corrects memory errors
  • 1 V operating voltage reduces power draw
  • 288-pin RDIMM form factor fits Supermicro server boards

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

商品問答

How do I install the 288-pin DDR5 RDIMM modules in the SuperMicro B13SEE-CPU-25G motherboard, and which step is often missed?

Power down the server, open the chassis, align each 64 GB module's key notch with the slot, press firmly until both retention clips click, then verify in BIOS that all 256 GB are detected at 5600 MT/s; the step often missed is seating all four modules before closing the case, leaving one partially inserted.

What maintenance or replacement will the 2Rx4 ECC registered DIMMs need over time?

No routine maintenance is required; ECC corrects single-bit errors on the fly, but if a module develops uncorrectable errors the system will log the failure and the affected 64 GB stick should be replaced to restore full 256 GB capacity.

What limit appears first when the kit runs sustained workloads at 5600 MT/s and 1.10 V?

The primary limit is thermal — without heat spreaders the Samsung, Micron or Hynix chips rely on chassis airflow, so inadequate cooling will trigger throttling or errors before voltage or timing constraints become an issue.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。