暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Single green 288-pin DDR4 UDIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR4 2933 CL21 2Rx8 1.2V 288-Pin UDIMM SuperMicro memory upgrade

SKU CH-5ZVD-TWTA8

A 32 GB DDR4 2933 MHz UDIMM module with CL21 latency and 1.2 V operation for SuperMicro workstations

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity supports heavy multitasking and large datasets
  • DDR4 2933 MT/s speed matches SuperMicro platform requirements
  • CL21 latency with 1.2 V operation balances responsiveness and efficiency
  • 2Rx8 dual-rank organisation maximises memory controller utilisation
  • 288-pin UDIMM form factor fits SuperMicro C9Z490 motherboards

NEMIX RAM 32GB DDR4 2933 UDIMM

This is a 32GB DDR4 UDIMM module built for SuperMicro workstations and desktop motherboards such as the MBD-C9Z490-PG and MBD-C9Z490-PGW. It runs at 2933 MT/s with a CAS latency of CL21 and operates at 1.2V. The stick uses a 2Rx8 organisation and has no heat spreader.

Who this suits and who should look elsewhere

This module suits administrators upgrading a compatible SuperMicro platform that accepts non-ECC unbuffered DDR4 memory. It is not for systems that require ECC registered DIMMs or that only support lower-density ranks. Buyers needing error correction or higher capacities per slot should look elsewhere.

32GB 2Rx8 DDR4 2933 specification

The single specification that decides fit is the 32GB 2Rx8 DDR4 2933 CL21 1.2V 288-pin UDIMM profile. Your motherboard must support this exact density, rank organisation, speed and voltage without ECC. Verify the qualified vendor list before purchase.

特長

  • 32 GB capacity supports heavy multitasking and large datasets
  • DDR4 2933 MT/s speed matches SuperMicro platform requirements
  • CL21 latency with 1.2 V operation balances responsiveness and efficiency
  • 2Rx8 dual-rank organisation maximises memory controller utilisation
  • 288-pin UDIMM form factor fits SuperMicro C9Z490 motherboards

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-328K1
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM

この商品に関する質問

Will the 288-pin DDR4 UDIMM fit a SuperMicro MBD-C9Z490-PG motherboard?

Yes, the 288-pin DDR4 UDIMM form factor matches the desktop DIMM slots on that SuperMicro board.

Which slot should I use first when installing this single 32GB module?

Install it in the primary slot indicated by your motherboard manual, usually the slot furthest from the CPU socket.

Does this non-ECC unbuffered module require any firmware updates or future replacement?

No firmware updates are needed; the module has no heat spreader and runs at 1.2V, so it is designed for the system's lifetime.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。