BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00280578BTC
現貨
NEMIX RAM
NEMIX RAM 32GB DDR4 2933 CL21 2Rx8 1.2V 288-Pin UDIMM SuperMicro memory upgrade
A 32 GB DDR4 2933 MHz UDIMM module with CL21 latency and 1.2 V operation for SuperMicro workstations
- Capacity32GB
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity supports heavy multitasking and large datasets
- DDR4 2933 MT/s speed matches SuperMicro platform requirements
- CL21 latency with 1.2 V operation balances responsiveness and efficiency
- 2Rx8 dual-rank organisation maximises memory controller utilisation
- 288-pin UDIMM form factor fits SuperMicro C9Z490 motherboards
NEMIX RAM 32GB DDR4 2933 UDIMM
This is a 32GB DDR4 UDIMM module built for SuperMicro workstations and desktop motherboards such as the MBD-C9Z490-PG and MBD-C9Z490-PGW. It runs at 2933 MT/s with a CAS latency of CL21 and operates at 1.2V. The stick uses a 2Rx8 organisation and has no heat spreader.
Who this suits and who should look elsewhere
This module suits administrators upgrading a compatible SuperMicro platform that accepts non-ECC unbuffered DDR4 memory. It is not for systems that require ECC registered DIMMs or that only support lower-density ranks. Buyers needing error correction or higher capacities per slot should look elsewhere.
32GB 2Rx8 DDR4 2933 specification
The single specification that decides fit is the 32GB 2Rx8 DDR4 2933 CL21 1.2V 288-pin UDIMM profile. Your motherboard must support this exact density, rank organisation, speed and voltage without ECC. Verify the qualified vendor list before purchase.
商品特色
- 32 GB capacity supports heavy multitasking and large datasets
- DDR4 2933 MT/s speed matches SuperMicro platform requirements
- CL21 latency with 1.2 V operation balances responsiveness and efficiency
- 2Rx8 dual-rank organisation maximises memory controller utilisation
- 288-pin UDIMM form factor fits SuperMicro C9Z490 motherboards
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-328K1 |
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM |
商品問答
Will the 288-pin DDR4 UDIMM fit a SuperMicro MBD-C9Z490-PG motherboard?
Yes, the 288-pin DDR4 UDIMM form factor matches the desktop DIMM slots on that SuperMicro board.
Which slot should I use first when installing this single 32GB module?
Install it in the primary slot indicated by your motherboard manual, usually the slot furthest from the CPU socket.
Does this non-ECC unbuffered module require any firmware updates or future replacement?
No firmware updates are needed; the module has no heat spreader and runs at 1.2V, so it is designed for the system's lifetime.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
