暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR5 memory module with gold edge connectors and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 ECC RDIMM CL40 1Rx4 1.1V memory upgrade

SKU CH-JKFW-XJEZK

A 32 GB DDR5-4800 ECC registered DIMM with CL40 latency and 1.1 V operation for compatible Hynix server platforms

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection safeguards data integrity in critical workloads
  • Registered DDR5 design improves signal stability on server platforms
  • 32 GB capacity expands memory headroom for virtualization
  • 4800 MT/s speed delivers high bandwidth for demanding applications
  • 1 V operation reduces power draw per module

Server-grade DDR5 capacity

This NEMIX RAM module delivers 32GB of DDR5 memory at 4800MHz with ECC and registered buffering. It operates at 1.1V with a CL40 latency and a 1Rx4 rank configuration. The 288-pin RDIMM form factor targets compatible server and workstation motherboards.

Replacing slower or non-ECC memory

The jump is worthwhile when workloads demand registered ECC stability at DDR5 speeds. Systems currently running lower-frequency DDR5 or unbuffered non-ECC modules gain error correction and signal integrity for sustained loads. Buyers who need more than 32GB per slot or a different rank structure should verify platform limits before ordering.

DDR5 registered DIMM constraints

The 288-pin DDR5 RDIMM interface requires a motherboard with registered DDR5 memory controllers and appropriate BIOS support. ECC functionality depends on platform-level enablement. Modules without heat spreaders rely on chassis airflow for thermal management. Compatibility is specific to systems qualified for this registered DDR5 standard.

特長

  • ECC protection safeguards data integrity in critical workloads
  • Registered DDR5 design improves signal stability on server platforms
  • 32 GB capacity expands memory headroom for virtualization
  • 4800 MT/s speed delivers high bandwidth for demanding applications
  • 1 V operation reduces power draw per module

仕様

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHynix
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

Will this 288-pin DDR5 RDIMM fit in a standard server motherboard slot?

Yes, the module uses the standard 288-pin DDR5 RDIMM form factor and requires a compatible registered DIMM slot.

Is any special BIOS setting needed to run this ECC registered memory at 4800 MHz?

The module operates at 1.1 V with CL40 latency; enable XMP or manually set speed, voltage and timings in BIOS if the system does not apply them automatically.

Does the lack of a heat spreader mean the chips need active airflow in a 1U chassis?

Without a heat spreader the DRAM relies on chassis airflow; ensure front-to-back cooling delivers sufficient air velocity across the module.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。