暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 2Rx8 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-8YAD-VV2GW

32 GB DDR5-5600 registered ECC RDIMM built to the exact rank, voltage and timing the Supermicro H14DSG-OM expects

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

他に 30点の構成を表示
  • 32 GB DDR5-5600 capacity for high-density server workloads
  • CL46 latency and 1.1 V operation matching the memory controller spec
  • 2Rx8 registered ECC RDIMM architecture for full-slot stability and error correction
  • 288-pin form factor verified for Supermicro H14DSG-OM motherboard fitment
  • Built with major OEM Samsung, Micron or Hynix DRAM chips

Exact-match DDR5-5600 ECC RDIMM for Supermicro

This 32 GB registered DDR5 module runs at 5600 MT/s (PC5-44800) with CL46 latency at 1.1 V. The 2Rx8 organization matches the memory controller expectations of the Supermicro H14DSG-OM motherboard so the system recognizes the full capacity and operates at the rated speed without manual tuning.

Sustained-load stability

Registered buffering reduces electrical load on the memory controller, allowing every populated slot to run at full rated frequency continuously. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during long-running server workloads such as virtualization, databases or compute clusters.

Verify DIMM population rules

Server memory validation varies by motherboard revision and BIOS version. Consult the Supermicro H14DSG-OM manual for approved DIMM population order, maximum capacity per channel and any required firmware updates before ordering. This module is a 288-pin RDIMM and is not compatible with UDIMM or SODIMM slots.

特長

  • 32 GB DDR5-5600 capacity for high-density server workloads
  • CL46 latency and 1.1 V operation matching the memory controller spec
  • 2Rx8 registered ECC RDIMM architecture for full-slot stability and error correction
  • 288-pin form factor verified for Supermicro H14DSG-OM motherboard fitment
  • Built with major OEM Samsung, Micron or Hynix DRAM chips

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 1.10V DDR5 5600 module run hot or draw much power in a fully populated Supermicro H14DSG-OM?

DDR5 at 1.10V is the standard operating voltage; registered architecture offloads the memory controller so every slot can stay fully populated at rated speed without extra voltage.

Will this 288-pin RDIMM work in my Supermicro H14DSG-OM without any other parts?

The module matches the board's required 288-pin RDIMM form factor, 2Rx8 rank, CL46 timing and 1.10V voltage, so it installs directly into the motherboard slots.

Can I mix this 2Rx8 CL46 RDIMM with older DDR5 sticks already in the H14DSG-OM?

Mixing ranks or timings can prevent the server from running at full capacity; consult the motherboard manual for approved population rules before adding this module.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。