暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 384GB (4 x 96GB) DDR5 5600 ECC RDIMM CL46 2Rx4 1.1V memory upgrade

SKU CH-EQX3-QTNTC

A 384GB kit of four 96GB DDR5 5600 ECC registered RDIMMs built for the GIGABYTE MZ33-CP1 motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

他に 24点の構成を表示
  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 5600 (PC5-44800) speed matches the motherboard's rated frequency
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • CL46 latency at 1.10 V delivers the exact timing and voltage the controller expects
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots precisely

Server Memory Upgrade

This 384GB kit contains four 96GB DDR5 5600 ECC registered RDIMMs built for the GIGABYTE MZ33-CP1 motherboard. It targets administrators who need maximum registered capacity in every slot without mixing ranks or voltages.

Sustained Operation

Registered buffering reduces electrical load on the memory controller so all four slots run at the rated 5600 speed under continuous server workloads. ECC corrects single-bit errors in real time to prevent silent data corruption during long-running tasks.

DDR5 Interface Limits

The DDR5 5600 (PC5-44800) standard caps transfer rate at 5600 MT/s and this kit operates at 1.1V with CL46 latency. Population rules and maximum supported capacity are defined by the motherboard firmware, not by the modules themselves.

特長

  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 5600 (PC5-44800) speed matches the motherboard's rated frequency
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • CL46 latency at 1.10 V delivers the exact timing and voltage the controller expects
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much heat and power do the 1.1 V DDR5 5600 modules draw when the server runs 24/7?

Each 96 GB RDIMM operates at the standard DDR5 voltage of 1.1 V and has no heat spreader, so power draw and thermals stay at JEDEC baseline levels for 5600 MT/s registered ECC memory.

What motherboard slot and population rules must my GIGABYTE MZ33-CP1 already support for this 4 × 96 GB kit to work?

The board needs four 288-pin DDR5 RDIMM slots wired for registered ECC and must allow 2Rx4 dual-rank modules in the population order listed in its manual to recognise the full 384 GB.

Will these CL46 2Rx4 RDIMMs run at 5600 MT/s if I keep older DDR5 4800 modules in the remaining slots?

The memory controller will down-clock every installed DIMM to the lowest common speed, so mixing with 4800 MT/s modules forces the kit to run at 4800 MT/s instead of its rated 5600 MT/s.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。