暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 48GB (6x8GB) DDR4 2666 ECC Unbuffered UDIMM server RAM

SKU CH-2RDA-RWK5D

Six 8 GB DDR4 ECC unbuffered UDIMMs at 2666 MHz with CL19 latency and 1.20 V

  • Capacity48GB (6 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Capacity 48GB (6 x 8GB)

  • 48 GB total capacity across six 8 GB modules
  • ECC protection detects and corrects single-bit errors
  • DDR4 2666 speed with CL19 latency for responsive throughput
  • 20 V operation keeps power draw low in dense servers
  • Unbuffered 288-pin UDIMM fits standard DDR4 server slots

48GB DDR4 ECC UDIMM kit

This NEMIX RAM kit supplies 48GB of DDR4 2666 memory across six 8GB unbuffered ECC UDIMMs. It targets servers, workstations and NAS devices that require error-correcting modules for data integrity. The 1Rx8 organisation and 1.2V operation suit standard DDR4 platforms. Buyers needing registered or load-reduced DIMMs should look elsewhere.

Installation and common issues

The 288-pin modules install in the usual way by aligning the notch and pressing until the latches click. No heat spreader is fitted so clearance is minimal. The most frequent problem is mixing these unbuffered ECC sticks with registered memory or populating slots in an order the motherboard manual does not support.

Compatibility checks before ordering

Confirm that your motherboard or server board accepts DDR4 2666 unbuffered ECC UDIMMs and can run six modules simultaneously. Verify the maximum supported capacity per slot and the total system limit. Ensure the BIOS is current enough to recognise 8GB 1Rx8 density at CL19 latency.

特長

  • 48 GB total capacity across six 8 GB modules
  • ECC protection detects and corrects single-bit errors
  • DDR4 2666 speed with CL19 latency for responsive throughput
  • 20 V operation keeps power draw low in dense servers
  • Unbuffered 288-pin UDIMM fits standard DDR4 server slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME21300-818K6
Capacity48GB (6 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How can I verify the kit is running at 2666 MT/s with CL19 after installation?

Open the BIOS or UEFI and confirm the memory frequency reads 2666 MT/s and the CAS latency shows CL19. Tools such as CPU-Z or dmidecode will also report DDR4-2666 and CL19 for each 8 GB module.

What exactly ships in the ME21300-818K6 kit and is anything else required?

The box contains six 8 GB DDR4 ECC unbuffered UDIMM modules for a total of 48 GB. No heat spreaders, cables or additional parts are included; the motherboard must provide 288-pin DDR4 slots and support 1.20 V ECC memory.

Why choose the 6 × 8 GB version instead of a different capacity kit?

This kit delivers 48 GB across six single-rank 1Rx8 modules, letting you fill six DIMM slots while keeping each rank at 8 GB for broad server and workstation compatibility.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。