暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR4 UDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2666 CL19 ECC UDIMM server RAM

SKU CH-DBX7-KTQZ3

A 32 GB kit of four 8 GB DDR4 2666 CL19 ECC UDIMM modules at 1.20 V for server and workstation memory upgrades

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity across four 8 GB modules
  • ECC error correction protects data integrity in servers
  • DDR4 2666 speed with CL19 latency for responsive performance
  • 20 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits compatible motherboards

Server memory kit for ECC workloads

This NEMIX RAM kit provides 32GB of DDR4 ECC unbuffered memory in a matched set of four 8GB modules. It targets administrators and builders who need error-correcting capacity for servers, workstations or NAS devices that accept standard UDIMM slots.

Thermal and electrical profile

Modules run at 1.20V with no heat spreaders attached, relying on case airflow for cooling. The DDR4 2666 speed and CL19 latency operate within standard JEDEC power limits, so no extra voltage or active cooling is required during normal operation.

Tested compatibility and support

Every module undergoes stress testing under load before shipping, and the kit is built with major OEM Samsung, Micron or Hynix chips. NEMIX RAM backs the memory with a lifetime replacement warranty and US-based IT support for troubleshooting installation or stability issues.

特長

  • 32 GB total capacity across four 8 GB modules
  • ECC error correction protects data integrity in servers
  • DDR4 2666 speed with CL19 latency for responsive performance
  • 20 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits compatible motherboards

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME21300-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 288-pin DDR4 UDIMM modules and what step is often missed?

Align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that all 32GB are detected at 2666 MT/s; the step often missed is seating every module fully so both clips engage.

What maintenance or replacement will the 1Rx8 ECC UDIMM kit need over time?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required; replacement is only necessary if a module fails, which is covered by the lifetime replacement warranty.

What limit appears first when the 1.20 V CL19 kit runs under sustained load?

The primary limit is the DDR4 2666 MT/s data rate and CL19 latency; without heat spreaders, thermal throttling can occur before voltage or rank limits are reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。