暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 CL46 2Rx8 1.1V ECC Registered RDIMM Supermicro H13SRH memory upgrade

SKU CH-JH2G-47HGV

A 48GB DDR5 5600 CL46 2Rx8 1.1V ECC Registered RDIMM matched to the Supermicro H13SRH memory controller for full-capacity stability

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Speed 5600MHz

  • Exact DDR5-5600 match for Supermicro H13SRH
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx8 rank layout enables full-slot population at rated speed
  • 1 V operation keeps power draw within server spec
  • 288-pin RDIMM form factor fits the board's memory slots

48 GB DDR5-5600 ECC RDIMM

This 48 GB DDR5-5600 module is a Registered ECC RDIMM built for the Supermicro H13SRH motherboard. It runs at PC5-44800 speed with CL46 latency at 1.1 V. The 2Rx8 organisation and 288-pin form factor match the board's memory-controller requirements exactly.

Suited for single-module capacity upgrades

Administrators expanding memory on a Supermicro H13SRH system can install this kit to add 48 GB per slot with registered buffering and ECC protection. Builders needing unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or different speed grades should select another part.

DDR5-5600 CL46 2Rx8 Registered ECC specification

The decisive specification is the DDR5-5600 CL46 2Rx8 Registered ECC profile at 1.1 V in a 288-pin RDIMM. Only modules with this exact rank, voltage, timing and buffering type will be recognised at full capacity and rated speed by the H13SRH memory controller.

特長

  • Exact DDR5-5600 match for Supermicro H13SRH
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx8 rank layout enables full-slot population at rated speed
  • 1 V operation keeps power draw within server spec
  • 288-pin RDIMM form factor fits the board's memory slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 5600 MT/s rating mean once this module is installed in the Supermicro H13SRH?

The memory controller will run this RDIMM at DDR5-5600, delivering PC5-44800 bandwidth at the rated CL46 latency when populated according to the board's memory-population rules.

How does the registered ECC interface affect what the Supermicro H13SRH can actually use?

Registered buffering lets the board fully populate every slot at 48 GB per module while ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots.

What physical slot and form factor does this 48 GB kit need to fit the H13SRH?

It uses the standard 288-pin DDR5 RDIMM form factor required by the Supermicro H13SRH — not a UDIMM or SODIMM — and installs directly into the board's DDR5 DIMM slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。