暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR5 RDIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 2Rx4 ECC RDIMM 1.1V Supermicro H13SRH memory upgrade

SKU CH-T6MN-FR20B

64GB DDR5 5600 ECC registered RDIMM with 2Rx4 organisation, CL46 timing and 1.1V operation, validated for Supermicro H13SRH motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

他に 18点の構成を表示

Speed 5600MHz

  • 64 GB DDR5 capacity ready for demanding server workloads
  • 5600 MT/s DDR5 speed matches the H13SRH memory controller spec
  • CL46 CAS latency and 1.1 V voltage tuned for registered DIMM stability
  • 2Rx4 ECC registered architecture corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the Supermicro H13SRH motherboard exactly

Supermicro H13SRH DDR5 RDIMM upgrade

This 64GB DDR5 5600 CL46 2Rx4 ECC Registered RDIMM is built for the Supermicro H13SRH motherboard. It delivers the exact rank, voltage and timing the server memory controller expects. Enterprise workloads gain full-capacity stability across every populated slot. The module runs at 1.1V with on-die ECC correction.

Verify population rules before ordering

Check your system manual for supported capacities, approved DIMM population order and installation steps. The board requires 288-pin Registered RDIMMs, not UDIMM or SODIMM form factors. Confirm the maximum modules per channel and any slot-filling sequence the vendor specifies. Ensure the BIOS version in use recognises this part number.

Replaces slower or smaller DDR5 RDIMMs

The jump is worth it when your current DDR5 RDIMMs run below 5600 MT/s or total capacity limits the workload. Registered architecture offloads the controller so fully populated configurations stay stable. ECC corrects single-bit errors before they corrupt production data. Buyers needing non-ECC UDIMMs or SODIMM form factors cannot use this module.

特長

  • 64 GB DDR5 capacity ready for demanding server workloads
  • 5600 MT/s DDR5 speed matches the H13SRH memory controller spec
  • CL46 CAS latency and 1.1 V voltage tuned for registered DIMM stability
  • 2Rx4 ECC registered architecture corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the Supermicro H13SRH motherboard exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 64GB DDR5-5600 kit include anything besides the RDIMM module, or do I need to buy a heat spreader separately?

The package contains the single 64GB 288-pin DDR5 5600 CL46 2Rx4 ECC Registered RDIMM. No heat spreader is included or required; the module ships without one.

My Supermicro H13SRH has multiple DDR5 slots — should I choose this 64GB 2Rx4 CL46 module or a different capacity or rank?

This exact part number MR44800-924K1 is validated for the H13SRH. Follow the motherboard manual for approved capacities, rank limits and population order; other capacities or ranks may not be supported.

What does the 5600 MT/s rating actually deliver once the module is installed in the H13SRH?

The board's memory controller will recognise the SPD profile and run the DIMM at DDR5-5600 with CL46 timings at 1.1V, delivering the rated PC5-44800 bandwidth when populated per the manual.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。