暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 UDIMM module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 1.35V 240-Pin Desktop RAM

SKU CH-9VPM-FBA6P

A 4 GB DDR3 desktop module rated at 1333 MT/s with CL9 latency and a 1.50 V operating voltage

  • Capacity4GB
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 4GB

  • Low-voltage 1.35V operation reduces power draw
  • 4GB DDR3 1333MHz module boosts desktop responsiveness
  • CL9 latency supports smooth multitasking
  • Major OEM chips ensure broad motherboard compatibility
  • Unbuffered non-ECC design suits standard PC builds

NEMIX RAM 4GB DDR3 1333 UDIMM

This NEMIX RAM module provides 4GB of DDR3 memory rated at 1333 MHz with a PC3-10600 classification. It uses a 240-pin UDIMM form factor and operates at 1.50V with CL9 latency. The stick is non-ECC and unbuffered, built with chips from major OEM suppliers such as Samsung, Micron, or Hynix. No heat spreader is included.

Suits older DDR3 desktops needing a basic 4GB

This module fits standard desktop motherboards that accept 240-pin DDR3 UDIMMs running at 1.50V. It is not suitable for systems that require ECC error correction, registered buffering, or 1.35V low-voltage operation. Buyers with laptops or small-form-factor boards using SO-DIMM slots must choose a different form factor.

Key spec: 1.50V DDR3 1333 240-pin non-ECC UDIMM

The decisive specification is the combination of 1.50V voltage, DDR3 1333 speed, 240-pin UDIMM layout, and non-ECC unbuffered design. Your motherboard must match all four of these parameters for the module to function correctly. Verify the board manual before purchase.

特長

  • Low-voltage 1.35V operation reduces power draw
  • 4GB DDR3 1333MHz module boosts desktop responsiveness
  • CL9 latency supports smooth multitasking
  • Major OEM chips ensure broad motherboard compatibility
  • Unbuffered non-ECC design suits standard PC builds

仕様

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-428LK1
Capacity4GB
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR3 1333 PC3-10600 interface cap at in practice?

The module runs at 1333 MT/s with a PC3-10600 bandwidth rating and CL9 latency.

What physical slot and clearance does the 240-pin UDIMM need to fit?

It requires a standard 240-pin DDR3 desktop DIMM slot and has no heat spreader for tight clearances.

How is the 1.35 V or 1.50 V module installed, and what step is often missed?

Align the notch, press firmly until both retention clips click, then verify the BIOS detects 4 GB at the rated speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。