暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 512GB 8x64GB DDR5 5600 CL46 2Rx4 ECC RDIMM memory upgrade for Supermicro H14DSG-OM

SKU CH-1KNR-6E67C

Eight 64 GB DDR5 RDIMMs deliver 512 GB of registered ECC memory at 5600 MT/s with CL46 timing for the Supermicro H14DSG-OM

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 512GB 8X64GB

他に 30点の構成を表示
  • 512 GB total capacity in an 8-module kit for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors on the fly
  • 10 V operation and CL46 latency match the motherboard memory controller exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OM motherboard

512GB DDR5-5600 ECC RDIMM kit for Supermicro

This 512GB kit contains eight 64GB DDR5-5600 registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. It is intended for administrators who need to populate every slot at full capacity without compatibility guesswork.

288-pin registered form factor with major OEM chips

Each module uses a 288-pin RDIMM design with 2Rx4 organisation and 1.10V operation, sourced from Samsung, Micron or Hynix die. The registered architecture buffers the command bus so all eight slots run stably at rated speed, while on-die ECC corrects single-bit errors before they affect workloads.

Replaces partial or mismatched DDR5 populations

If the server currently runs fewer modules, slower speeds or unbuffered DIMMs that the board cannot recognise at full capacity, this kit restores the validated configuration. The jump is worthwhile when the platform manual confirms eight-DIMM support at DDR5-5600 and the application demands maximum registered ECC capacity.

特長

  • 512 GB total capacity in an 8-module kit for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors on the fly
  • 10 V operation and CL46 latency match the motherboard memory controller exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OM motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the DDR5-5600 PC5-44800 interface cap the transfer rate at 5600 MT/s on the Supermicro H14DSG-OM?

Yes, the kit is rated DDR5-5600 (PC5-44800) so the memory controller will run it at 5600 MT/s when populated per the board rules.

What physical slot and form factor do the 8 x 64 GB modules need on the H14DSG-OM?

The motherboard requires 288-pin DDR5 RDIMM slots; each module is a registered 2Rx4 DIMM that fits those slots.

How are the eight RDIMMs installed and which population step is often missed?

Follow the manual's DIMM population order for eight 2Rx4 modules; the common mistake is skipping the prescribed sequence and not seating every module fully.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。