暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green 288-pin DDR5 RDIMM modules in a 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V ECC Registered RDIMM for Supermicro X14SRA-F

SKU CH-37DD-Q2DK9

A 64 GB (2 × 32 GB) DDR5 5600 CL46 2Rx8 1.1 V ECC registered RDIMM kit validated for the Supermicro X14SRA-F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

他に 4点の構成を表示
  • 64 GB kit lets you fully populate two slots with matched 32 GB modules
  • DDR5 5600 speed and CL46 latency deliver the rated throughput your memory controller expects
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation meets the exact voltage the platform requires for stable operation
  • 288-pin RDIMM form factor matches the Supermicro X14SRA-F slot specification exactly

Exact-match DDR5 ECC RDIMM kit for Supermicro

This 64 GB kit contains two 32 GB DDR5-5600 modules built to the PC5-44800 standard. Each stick is a 288-pin Registered DIMM with 2Rx8 organisation, CL46 latency and 1.10 V operation. The combination of ECC and registered buffering delivers the error correction and signal integrity required by the Supermicro X14SRA-F platform.

Verify motherboard population rules

Consult the Supermicro X14SRA-F manual for approved DIMM capacities, population order and maximum supported memory per channel. The board requires 288-pin RDIMMs; UDIMMs or SODIMMs will not fit or function. Confirm that your firmware revision supports the full 64 GB kit at the rated DDR5-5600 speed.

Replaces non-ECC or lower-capacity DDR5 RDIMMs

The upgrade is worthwhile when your workloads demand registered ECC memory for data integrity or when the current configuration leaves slots empty and limits total capacity. If the system already runs a validated 64 GB DDR5-5600 RDIMM population, the kit provides no additional benefit.

特長

  • 64 GB kit lets you fully populate two slots with matched 32 GB modules
  • DDR5 5600 speed and CL46 latency deliver the rated throughput your memory controller expects
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation meets the exact voltage the platform requires for stable operation
  • 288-pin RDIMM form factor matches the Supermicro X14SRA-F slot specification exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the kit come with both 32 GB modules or do I need to order a second stick separately?

The kit contains two 32 GB DDR5 RDIMMs for a total of 64 GB, so nothing else is required.

Should I pick the 2Rx8 CL46 version or is there another rank or latency option for this motherboard?

This part is a 2Rx8 CL46 module at 1.10 V; the Supermicro X14SRA-F memory list calls for exactly that rank and timing.

Will the rated 5600 MT/s speed actually run on the X14SRA-F or does it drop to a lower JEDEC speed?

The modules are specified at DDR5 5600 (PC5-44800) and the board's qualified-vendor list includes this exact speed, so they operate at the rated 5600 MT/s.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。