NEMIX RAM 64GB (2x32GB) DDR5-6400 ECC RDIMM CL52 2Rx4 1.1V memory upgrade for Supermicro X14SDW-40C-SP9F
- 64GB (2 x 32GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
64 GB DDR5-6400 ECC registered DIMM kit validated for the Supermicro X14SDW-36CE-SP9F motherboard
Size 64GB 2X32GB
This 64GB kit contains two 32GB DDR5-6400 ECC Registered RDIMMs built to the precise rank, voltage and timing the Supermicro X14SDW-36CE-SP9F memory controller expects. It is intended for administrators upgrading that specific server platform with validated modules that populate every slot at full rated speed.
Registered (buffered) architecture offloads the memory controller so all slots can run fully populated at 6400 MT/s while ECC corrects single-bit errors on the fly. The motherboard manual defines supported capacities, approved DIMM population order and any per-channel limits; exceeding those rules will prevent the system from posting at the rated speed.
The sticks ship without heat spreaders, relying on server chassis airflow for cooling. Their 288-pin Registered form factor fits only DDR5 RDIMM slots — not UDIMM or SODIMM sockets — so they cannot be used in workstations or laptops that require unbuffered or small-outline modules.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-324K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
This kit provides 64GB as two 32GB modules (2Rx4). The motherboard manual lists supported capacities and the required population order; follow that guide to select the correct total capacity for your configuration.
The memory controller will run the kit at 6400 MT/s with CL52 latency at 1.1V, delivering the rated bandwidth when the board is populated according to its validated rules.
Yes. The board requires 288-pin Registered DDR5 RDIMMs; this kit matches that form factor, voltage, and ECC specification so every slot can be fully populated.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?