BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
NEMIX RAM
64GB kit of four 16GB DDR4 2666 UDIMM modules, CL19 1.2V, validated for SuperMicro MBD-C9Z390-CG workstations
This 64 GB kit contains four 16 GB DDR4 UDIMMs rated at 2666 MT/s (PC4-21300) with CL19 timing at 1.2 V. The modules are 1Rx8 unbuffered non-ECC and carry no heat spreaders. They are built specifically for the SuperMicro MBD-C9Z390-CG workstation motherboard.
Confirm that your motherboard is the exact SuperMicro MBD-C9Z390-CG model; other boards may not support this configuration. Verify the CPU and chipset accept 2666 MT/s DDR4 unbuffered non-ECC UDIMMs at 1.2 V. Ensure four free 288-pin DIMM slots are available and that the BIOS is updated to the version recommended by SuperMicro for 64 GB population.
The kit fills all four slots on the target board, delivering the maximum supported density without mixing ranks. Standard 1.2 V operation keeps power draw low and leaves headroom for the CPU and add-in cards. No additional cooling is required for the bare modules, and the unbuffered design imposes no extra load on the memory controller.
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT |
The kit contains four 16 GB DDR4 UDIMM modules for a total of 64 GB. No extra parts are required; the modules plug directly into the motherboard's 288-pin slots.
This 64 GB kit matches the SuperMicro MBD-C9Z390-CG's supported DDR4 2666 specification and fills four slots with 1Rx8 modules at 1.20 V for stable operation.
PC4-21300 indicates a peak transfer rate of 21 300 MB/s at 2666 MHz, which is the maximum bandwidth the board's memory controller can use with these CL19 modules.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?