BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
NEMIX RAM
64GB kit of four 16GB DDR4 2666 UDIMM modules, CL19 1.2V, validated for SuperMicro MBD-C9Z390-CG workstations
This 64 GB kit contains four 16 GB DDR4 UDIMMs rated at 2666 MT/s (PC4-21300) with CL19 timing at 1.2 V. The modules are 1Rx8 unbuffered non-ECC and carry no heat spreaders. They are built specifically for the SuperMicro MBD-C9Z390-CG workstation motherboard.
Confirm that your motherboard is the exact SuperMicro MBD-C9Z390-CG model; other boards may not support this configuration. Verify the CPU and chipset accept 2666 MT/s DDR4 unbuffered non-ECC UDIMMs at 1.2 V. Ensure four free 288-pin DIMM slots are available and that the BIOS is updated to the version recommended by SuperMicro for 64 GB population.
The kit fills all four slots on the target board, delivering the maximum supported density without mixing ranks. Standard 1.2 V operation keeps power draw low and leaves headroom for the CPU and add-in cards. No additional cooling is required for the bare modules, and the unbuffered design imposes no extra load on the memory controller.
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT |
The kit contains four 16 GB DDR4 UDIMM modules for a total of 64 GB. No extra parts are required; the modules plug directly into the motherboard's 288-pin slots.
This 64 GB kit matches the SuperMicro MBD-C9Z390-CG's supported DDR4 2666 specification and fills four slots with 1Rx8 modules at 1.20 V for stable operation.
PC4-21300 indicates a peak transfer rate of 21 300 MB/s at 2666 MHz, which is the maximum bandwidth the board's memory controller can use with these CL19 modules.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?