暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green DDR5 RDIMM circuit board with gold edge contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 ECC RDIMM SuperMicro memory upgrade

SKU CH-XTJE-EP30E

A 64GB DDR5 4800 CL40 ECC registered DIMM built for SuperMicro FatTwin SuperServer systems

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity supports large server workloads
  • DDR5 4800 MT/s delivers high memory bandwidth
  • ECC registered design protects data integrity
  • 10 V operation reduces power consumption
  • Validated for Supermicro FatTwin SYS-F521E3-RTB and SYS-F511E2-RT

64GB DDR5 4800 ECC RDIMM

This module is a single 64GB DDR5 4800 CL40 registered DIMM with ECC and a 2Rx4 organisation. It operates at 1.1V and uses the standard 288-pin DDR5 form factor. The part is built for SuperMicro FatTwin and SuperServer platforms including the SYS-F521E3-RTB, SYS-F511E2-RT and X13SEFR-A motherboard.

Suited for SuperMicro DDR5 servers needing

Administrators expanding or repairing compatible FatTwin or SuperServer systems can install this module directly. It is not intended for desktop boards that accept only unbuffered non-ECC DIMMs, nor for platforms that require a different voltage, pin count or memory generation.

Registered ECC with 2Rx4 organisation

The combination of registered signalling, on-die ECC and a dual-rank 2Rx4 layout determines whether the motherboard's memory controller can address the module. Verify that the target SuperMicro system lists MR38400-924K1 or an equivalent 64GB DDR5 4800 registered ECC part before ordering.

特長

  • 64 GB capacity supports large server workloads
  • DDR5 4800 MT/s delivers high memory bandwidth
  • ECC registered design protects data integrity
  • 10 V operation reduces power consumption
  • Validated for Supermicro FatTwin SYS-F521E3-RTB and SYS-F511E2-RT

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

Will this DDR5 4800 CL40 2Rx4 ECC RDIMM run correctly if I keep my existing DDR5 4800 modules in the other slots?

Yes, this registered ECC DDR5 module operates at 4800 MT/s with CL40 timing and 1.1 V. Matching speed, voltage, rank and ECC type across all populated channels lets the memory controller train without down-clocking.

How can I confirm the module is detected and running at 4800 MT/s with ECC active after installation?

Enter the SuperMicro BIOS or use a tool such as dmidecode; you should see a single 64 GB DDR5 RDIMM at 4800 MT/s, CL40, 2Rx4 organisation, registered ECC enabled and voltage reported as 1.1 V.

What exactly ships in the box and do I need any extra brackets or cables?

The package contains one 64 GB 288-pin DDR5 RDIMM only; no heat spreader, brackets, cables or additional hardware are included or required for installation in a compatible SuperMicro server.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。