我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green DDR5 RDIMM circuit board with gold edge contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 ECC RDIMM SuperMicro memory upgrade

SKU CH-XTJE-EP30E

A 64GB DDR5 4800 CL40 ECC registered DIMM built for SuperMicro FatTwin SuperServer systems

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity supports large server workloads
  • DDR5 4800 MT/s delivers high memory bandwidth
  • ECC registered design protects data integrity
  • 10 V operation reduces power consumption
  • Validated for Supermicro FatTwin SYS-F521E3-RTB and SYS-F511E2-RT

64GB DDR5 4800 ECC RDIMM

This module is a single 64GB DDR5 4800 CL40 registered DIMM with ECC and a 2Rx4 organisation. It operates at 1.1V and uses the standard 288-pin DDR5 form factor. The part is built for SuperMicro FatTwin and SuperServer platforms including the SYS-F521E3-RTB, SYS-F511E2-RT and X13SEFR-A motherboard.

Suited for SuperMicro DDR5 servers needing

Administrators expanding or repairing compatible FatTwin or SuperServer systems can install this module directly. It is not intended for desktop boards that accept only unbuffered non-ECC DIMMs, nor for platforms that require a different voltage, pin count or memory generation.

Registered ECC with 2Rx4 organisation

The combination of registered signalling, on-die ECC and a dual-rank 2Rx4 layout determines whether the motherboard's memory controller can address the module. Verify that the target SuperMicro system lists MR38400-924K1 or an equivalent 64GB DDR5 4800 registered ECC part before ordering.

商品特色

  • 64 GB capacity supports large server workloads
  • DDR5 4800 MT/s delivers high memory bandwidth
  • ECC registered design protects data integrity
  • 10 V operation reduces power consumption
  • Validated for Supermicro FatTwin SYS-F521E3-RTB and SYS-F511E2-RT

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

商品問答

Will this DDR5 4800 CL40 2Rx4 ECC RDIMM run correctly if I keep my existing DDR5 4800 modules in the other slots?

Yes, this registered ECC DDR5 module operates at 4800 MT/s with CL40 timing and 1.1 V. Matching speed, voltage, rank and ECC type across all populated channels lets the memory controller train without down-clocking.

How can I confirm the module is detected and running at 4800 MT/s with ECC active after installation?

Enter the SuperMicro BIOS or use a tool such as dmidecode; you should see a single 64 GB DDR5 RDIMM at 4800 MT/s, CL40, 2Rx4 organisation, registered ECC enabled and voltage reported as 1.1 V.

What exactly ships in the box and do I need any extra brackets or cables?

The package contains one 64 GB 288-pin DDR5 RDIMM only; no heat spreader, brackets, cables or additional hardware are included or required for installation in a compatible SuperMicro server.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。