暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-FBH9-0MR29

64GB DDR5 5600 ECC registered RDIMM built for the Supermicro H14DSG-OM motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Full 64 GB capacity at rated DDR5 5600 speed because the 2Rx4 CL46 timing matches the controller exactly
  • Registered ECC architecture offloads the controller and corrects single-bit errors for stable full-slot operation
  • Verified fit for Supermicro H14DSG-OM with the required 288-pin RDIMM form factor and population rules
  • Low 1.1 V DDR5 voltage reduces power draw while maintaining enterprise reliability
  • Built with major OEM chips (Samsung, Micron, Hynix) and backed by lifetime replacement support

Exact-match 64 GB DDR5-5600 RDIMM

This 64 GB DDR5 module runs at 5600 MT/s with CL46 latency and 1.1 V operation. It uses a 2Rx4 registered ECC design built with major OEM chips. The part is validated for the Supermicro H14DSG-OM motherboard.

Verify motherboard population rules

Consult the Supermicro H14DSG-OM manual for supported capacities and approved DIMM installation order before ordering. The board requires 288-pin registered RDIMMs, not UDIMMs or SODIMMs. Matching rank, voltage and timing ensures recognition at full speed.

Registered ECC for full-slot stability

Registered architecture offloads the memory controller so every slot runs fully populated at rated capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption. The module has no heat spreader and fits the 288-pin DDR5 slots your platform provides.

特長

  • Full 64 GB capacity at rated DDR5 5600 speed because the 2Rx4 CL46 timing matches the controller exactly
  • Registered ECC architecture offloads the controller and corrects single-bit errors for stable full-slot operation
  • Verified fit for Supermicro H14DSG-OM with the required 288-pin RDIMM form factor and population rules
  • Low 1.1 V DDR5 voltage reduces power draw while maintaining enterprise reliability
  • Built with major OEM chips (Samsung, Micron, Hynix) and backed by lifetime replacement support

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What is included in the box and do I need any extra parts?

The package contains one 64GB DDR5 5600 CL46 2Rx4 ECC RDIMM module. No additional components are required for installation into a compatible Supermicro H14DSG-OM motherboard.

Which capacity and speed should I choose for this server?

This exact-match kit provides 64GB at DDR5 5600 (PC5-44800) with CL46 timing and 1.1V voltage, matching the memory controller specifications for the H14DSG-OM.

What does the 5600 MT/s rating deliver in the actual system?

The module runs at the rated DDR5 5600 speed with CL46 latency when installed in the Supermicro H14DSG-OM, providing registered ECC stability for full-capacity operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。