暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 RDIMM module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2933 ECC RDIMM CL21 memory upgrade

SKU CH-EJXM-PJ2R2

An 8 GB DDR4-2933 ECC registered DIMM with CL21 latency and 1.2 V operation for compatible Micron servers

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data errors in servers
  • Registered design stabilises heavy workloads on motherboards
  • DDR4 2933 speed handles demanding applications
  • 2 V operation reduces power draw
  • 288-pin RDIMM fits compatible Micron systems

Server-grade ECC RDIMM for Micron systems

This 8 GB DDR4-2933 registered module carries ECC and a CL21 latency at 1.20 V. It is built for Micron-branded server and workstation boards that require registered DIMMs. The single-rank 1Rx8 organisation fits the MTA9ASF1G72PZ-2G9 specification.

288-pin registered design with no heat spreader

The bare PCB slides into standard DDR4 RDIMM slots and draws 1.20 V without extra clearance for a spreader. Registered signalling reduces electrical load on the memory controller, supporting stable operation in multi-module configurations. No additional cooling hardware is needed.

Replaces non-ECC or slower registered DIMMs

Upgrading from unbuffered non-ECC memory adds error correction for data integrity in critical workloads. Moving from lower-speed DDR4 RDIMMs raises bandwidth to PC4-23400. The jump is worth it when the platform demands registered ECC modules and the current population limits capacity or speed.

特長

  • ECC protection prevents data errors in servers
  • Registered design stabilises heavy workloads on motherboards
  • DDR4 2933 speed handles demanding applications
  • 2 V operation reduces power draw
  • 288-pin RDIMM fits compatible Micron systems

仕様

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMICRON
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

What does the DDR4 2933 PC4-23400 rating mean for real-world throughput?

The module runs at 2933 MT/s with a peak bandwidth of PC4-23400; actual throughput depends on the server memory controller and channel population.

Will this 288-pin 1Rx8 RDIMM fit my Micron-compatible server board?

It uses the standard 288-pin DDR4 RDIMM form factor and 1Rx8 organisation, matching Micron MTA9ASF1G72PZ-2G9 specifications for registered DIMM slots.

How do I install this ECC registered module, and what step is often missed?

Power down, open the chassis, align the notch on the 288-pin edge connector, press firmly until the retention clips lock, then verify in BIOS that ECC and registered mode are enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。