暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 UDIMM sticks without heat spreaders, 96GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 ECC UDIMM Supermicro X14SAE memory upgrade

SKU CH-Z0EG-WG5N0

96GB DDR5 ECC UDIMM kit with two 48GB modules running at 5600MHz CL46 1.1V for the Supermicro X14SAE motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

  • 96 GB capacity with two 48 GB modules for maximum system memory
  • DDR5 5600 speed rated at PC5-44800 for high data throughput
  • ECC unbuffered design corrects single-bit errors to protect data integrity
  • CL46 latency at 1.1 V voltage for stable low-power operation
  • 288-pin UDIMM form factor validated for Supermicro X14SAE motherboard

Exact-match Supermicro X14SAE kit

This 96GB kit contains two 48GB DDR5 ECC UDIMM modules rated at 5600MHz with CL46 latency and 1.1V operation. It is built as a direct upgrade for the Supermicro X14SAE motherboard that requires unbuffered ECC memory in a 288-pin form factor.

Sustained workload stability

Error-correcting code detects and corrects single-bit errors on the fly to prevent silent data corruption during long compute runs. The 2Rx8 organisation and 1.1V supply match the board's memory controller expectations so the kit runs at its rated speed without throttling.

Straightforward DIMM installation

Modules install in the standard 288-pin UDIMM slots following the motherboard manual's population order. The kit has no heat spreader, so clearance is minimal, but builders must still verify supported capacities and slot sequence for their specific X14SAE configuration before purchase.

特長

  • 96 GB capacity with two 48 GB modules for maximum system memory
  • DDR5 5600 speed rated at PC5-44800 for high data throughput
  • ECC unbuffered design corrects single-bit errors to protect data integrity
  • CL46 latency at 1.1 V voltage for stable low-power operation
  • 288-pin UDIMM form factor validated for Supermicro X14SAE motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power do these 1.10V DDR5-5600 ECC UDIMMs draw when the Supermicro X14SAE runs continuously?

At the rated 1.10 volts the kit operates at the standard DDR5-5600 voltage, keeping power draw within the board's memory-controller budget for all-day workloads.

What must my Supermicro X14SAE already provide for this 288-pin DDR5-5600 ECC UDIMM kit to function?

The board needs DDR5-capable memory slots, support for unbuffered ECC UDIMMs at 5600 MT/s, and the correct population rules for two 48 GB 2Rx8 modules.

Will these 5600 MT/s CL46 modules down-clock if I keep slower DDR5 DIMMs installed in the other slots of the X14SAE?

The memory controller will run all populated slots at the lowest common speed and latency, so slower DDR5 DIMMs will pull this kit down to their rated frequency and timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。