暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM X14SRG-TF memory upgrade

SKU CH-TMSC-3KH0R

96 GB DDR5 6400 registered ECC RDIMM built for the Supermicro X14SRG-TF motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB

他に 4点の構成を表示
  • 96GB DDR5 6400 CL52 2Rx4 capacity runs at rated speed
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • 1V operation matches server memory controller voltage expectation
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF memory slots
  • Samsung Micron Hynix chips provide enterprise-grade component reliability

96 GB DDR5 RDIMM for Supermicro X14SRG-TF

This 96 GB DDR5-6400 registered ECC module is built for the Supermicro X14SRG-TF motherboard. It targets administrators who need maximum capacity per slot in a verified configuration. The 288-pin RDIMM form factor matches the board's registered memory requirement exactly.

Registered 2Rx4 architecture at 1.1 V

The single specification that decides fitment is the registered 2Rx4 organisation combined with 1.10 V operation and CL52 timing. The memory controller on the X14SRG-TF expects this precise rank structure and voltage; a UDIMM or different rank layout will not be recognised at full speed or capacity.

Full-speed capacity with ECC headroom

At 96 GB per module the kit delivers the density the platform supports while ECC corrects single-bit errors before they affect workloads. Registered buffering lets every slot run fully populated at the rated 6400 MT/s without signal degradation. Systems requiring unbuffered memory or lower voltages cannot use this module.

特長

  • 96GB DDR5 6400 CL52 2Rx4 capacity runs at rated speed
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • 1V operation matches server memory controller voltage expectation
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF memory slots
  • Samsung Micron Hynix chips provide enterprise-grade component reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 6400 MT/s rating hold when this module is installed in a Supermicro X14SRG-TF?

Yes, the board's memory controller is designed for DDR5 6400 (PC5-51200) and the module matches the exact rank, voltage and timing the controller expects, so it will run at the rated speed.

What does the 288-pin RDIMM form factor mean for installation?

It fits only motherboards that accept 288-pin DDR5 Registered DIMMs — not UDIMM or SODIMM slots — and the X14SRG-TF requires this registered form factor.

How much clearance does the module need above the DIMM slot?

The module has no heat spreader, so it uses the standard low-profile height of a bare 288-pin DDR5 RDIMM and fits under typical server heatsinks and airflow shrouds.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。