저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM X14SRG-TF memory upgrade

SKU CH-TMSC-3KH0R

96 GB DDR5 6400 registered ECC RDIMM built for the Supermicro X14SRG-TF motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96GB DDR5 6400 CL52 2Rx4 capacity runs at rated speed
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • 1V operation matches server memory controller voltage expectation
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF memory slots
  • Samsung Micron Hynix chips provide enterprise-grade component reliability

96 GB DDR5 RDIMM for Supermicro X14SRG-TF

This 96 GB DDR5-6400 registered ECC module is built for the Supermicro X14SRG-TF motherboard. It targets administrators who need maximum capacity per slot in a verified configuration. The 288-pin RDIMM form factor matches the board's registered memory requirement exactly.

Registered 2Rx4 architecture at 1.1 V

The single specification that decides fitment is the registered 2Rx4 organisation combined with 1.10 V operation and CL52 timing. The memory controller on the X14SRG-TF expects this precise rank structure and voltage; a UDIMM or different rank layout will not be recognised at full speed or capacity.

Full-speed capacity with ECC headroom

At 96 GB per module the kit delivers the density the platform supports while ECC corrects single-bit errors before they affect workloads. Registered buffering lets every slot run fully populated at the rated 6400 MT/s without signal degradation. Systems requiring unbuffered memory or lower voltages cannot use this module.

주요 특징

  • 96GB DDR5 6400 CL52 2Rx4 capacity runs at rated speed
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • 1V operation matches server memory controller voltage expectation
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF memory slots
  • Samsung Micron Hynix chips provide enterprise-grade component reliability

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 6400 MT/s rating hold when this module is installed in a Supermicro X14SRG-TF?

Yes, the board's memory controller is designed for DDR5 6400 (PC5-51200) and the module matches the exact rank, voltage and timing the controller expects, so it will run at the rated speed.

What does the 288-pin RDIMM form factor mean for installation?

It fits only motherboards that accept 288-pin DDR5 Registered DIMMs — not UDIMM or SODIMM slots — and the X14SRG-TF requires this registered form factor.

How much clearance does the module need above the DIMM slot?

The module has no heat spreader, so it uses the standard low-profile height of a bare 288-pin DDR5 RDIMM and fits under typical server heatsinks and airflow shrouds.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.