暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules, black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 192GB 2x96GB CL46 1.1V ECC RDIMM Supermicro X14SDV-36C-SP3F memory upgrade

SKU CH-MH7C-TEX9M

192 GB DDR5-5600 registered ECC kit (2 × 96 GB, CL46, 1.1 V) validated for Supermicro X14SDV-36C-SP3F

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB total capacity across two 96 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered RDIMM corrects single-bit errors automatically
  • 1 V operating voltage matches server spec exactly
  • 288-pin 2Rx4 form factor fits Supermicro X14SDV-36C-SP3F motherboard

Supermicro X14SDV-36C-SP3F DDR5 Kit

This 192 GB kit contains two 96 GB DDR5 5600 RDIMM modules built for the Supermicro X14SDV-36C-SP3F motherboard. The 288-pin registered ECC design matches the board's memory controller requirements exactly. It is intended for server administrators who need maximum supported capacity in a validated configuration.

192 GB Registered ECC Capacity

Two 2Rx4 ranks per module let the controller address the full 192 GB at the rated 5600 MT/s speed with CL46 latency and 1.1 V operation. Registered buffering offloads the controller so every slot runs fully populated without down-clocking. ECC corrects single-bit errors on the fly to prevent silent data corruption in production workloads.

288-Pin RDIMM Form Factor

The modules use the 288-pin RDIMM form factor this motherboard requires, not UDIMM or SODIMM. Installation must follow the board's documented population order for full recognition. Builders needing unbuffered memory or a different pin count cannot use this kit.

特長

  • 192 GB total capacity across two 96 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered RDIMM corrects single-bit errors automatically
  • 1 V operating voltage matches server spec exactly
  • 288-pin 2Rx4 form factor fits Supermicro X14SDV-36C-SP3F motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will these 2Rx4 RDIMMs work with the existing DDR5 5600 modules already installed in my Supermicro X14SDV-36C-SP3F?

This kit is spec-matched to the X14SDV-36C-SP3F memory population rules. Install the new 96 GB RDIMMs in the slots specified by the board manual for full 192 GB capacity at DDR5 5600 CL46 1.1 V.

How can I verify the kit is running at DDR5 5600 CL46 1.1 V with ECC active after installation?

Enter the BIOS and confirm the memory speed reads 5600 MT/s, CAS latency 46, voltage 1.10 V and ECC status enabled. The OS should report 192 GB total with corrected error counting available.

Does the package include only the two 96 GB RDIMMs or are any cables, brackets or licences supplied?

The box contains the 192 GB kit as two 96 GB DDR5 5600 CL46 1.1 V ECC Registered 288-pin RDIMMs. No cables, brackets, heat spreaders or software licences are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。