暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules, no heat spreaders, 288 pins, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 6400 ECC Registered RDIMM 192GB 2x96GB CL52 1.1V 2Rx4 Supermicro X14SDW-42C-SP9F memory upgrade

SKU CH-7ADX-XGD48

A 192 GB DDR5 6400 ECC registered RDIMM kit (2 × 96 GB, CL52, 1.1 V, 2Rx4) validated for the Supermicro X14SDW-42C-SP9F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for the Supermicro X14SDW-42C-SP9F
  • Registered ECC architecture with CL52 latency corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank matches the board's exact voltage and timing requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every supported slot

Server DDR5 ECC RDIMM Kit

This 192GB kit contains two 96GB DDR5 6400 registered ECC RDIMMs built for the Supermicro X14SDW-42C-SP9F motherboard. The modules run at 1.1V with CL52 latency and a 2Rx4 rank configuration. They are designed for servers that require registered memory with error correction.

Registered 2Rx4 Architecture

The single specification that decides fit is the registered 2Rx4 DDR5 RDIMM form factor at 1.1V. This motherboard only accepts 288-pin registered ECC modules with this exact rank and voltage; unbuffered UDIMMs or SODIMMs will not be recognised.

Full-Population Stability

Registered buffering offloads the memory controller so every slot runs fully populated at the rated 6400 speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. Verify the board manual for approved DIMM population order before installation.

特長

  • 192 GB capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for the Supermicro X14SDW-42C-SP9F
  • Registered ECC architecture with CL52 latency corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank matches the board's exact voltage and timing requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every supported slot

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 6400 MT/s speed run at that rate on my Supermicro X14SDW-42C-SP9F?

The kit is spec-matched to the board's DDR5 6400 memory controller, so the modules will be recognised at their rated 6400 MT/s when installed in the correct slots.

Does the 288-pin RDIMM form factor fit the Supermicro X14SDW-42C-SP9F DIMM slots?

Yes, the 288-pin Registered DIMM is the exact form factor the motherboard requires; it is not a UDIMM or SODIMM and will seat in the standard DDR5 server slots.

What clearance does the 96 GB module need since it has no heat spreader?

Without a heat spreader the modules are low-profile, so they fit in tight server chassis and allow normal airflow from the system fans.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。