Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green DDR5 RDIMM modules, no heat spreaders, 288 pins, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 6400 ECC Registered RDIMM 192GB 2x96GB CL52 1.1V 2Rx4 Supermicro X14SDW-42C-SP9F memory upgrade

SKU CH-7ADX-XGD48

A 192 GB DDR5 6400 ECC registered RDIMM kit (2 × 96 GB, CL52, 1.1 V, 2Rx4) validated for the Supermicro X14SDW-42C-SP9F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for the Supermicro X14SDW-42C-SP9F
  • Registered ECC architecture with CL52 latency corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank matches the board's exact voltage and timing requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every supported slot

Server DDR5 ECC RDIMM Kit

This 192GB kit contains two 96GB DDR5 6400 registered ECC RDIMMs built for the Supermicro X14SDW-42C-SP9F motherboard. The modules run at 1.1V with CL52 latency and a 2Rx4 rank configuration. They are designed for servers that require registered memory with error correction.

Registered 2Rx4 Architecture

The single specification that decides fit is the registered 2Rx4 DDR5 RDIMM form factor at 1.1V. This motherboard only accepts 288-pin registered ECC modules with this exact rank and voltage; unbuffered UDIMMs or SODIMMs will not be recognised.

Full-Population Stability

Registered buffering offloads the memory controller so every slot runs fully populated at the rated 6400 speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. Verify the board manual for approved DIMM population order before installation.

Najważniejsze cechy

  • 192 GB capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for the Supermicro X14SDW-42C-SP9F
  • Registered ECC architecture with CL52 latency corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank matches the board's exact voltage and timing requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every supported slot

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will the 6400 MT/s speed run at that rate on my Supermicro X14SDW-42C-SP9F?

The kit is spec-matched to the board's DDR5 6400 memory controller, so the modules will be recognised at their rated 6400 MT/s when installed in the correct slots.

Does the 288-pin RDIMM form factor fit the Supermicro X14SDW-42C-SP9F DIMM slots?

Yes, the 288-pin Registered DIMM is the exact form factor the motherboard requires; it is not a UDIMM or SODIMM and will seat in the standard DDR5 server slots.

What clearance does the 96 GB module need since it has no heat spreader?

Without a heat spreader the modules are low-profile, so they fit in tight server chassis and allow normal airflow from the system fans.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.