我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules, no heat spreaders, 288 pins, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 6400 ECC Registered RDIMM 192GB 2x96GB CL52 1.1V 2Rx4 Supermicro X14SDW-42C-SP9F memory upgrade

SKU CH-7ADX-XGD48

A 192 GB DDR5 6400 ECC registered RDIMM kit (2 × 96 GB, CL52, 1.1 V, 2Rx4) validated for the Supermicro X14SDW-42C-SP9F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for the Supermicro X14SDW-42C-SP9F
  • Registered ECC architecture with CL52 latency corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank matches the board's exact voltage and timing requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every supported slot

Server DDR5 ECC RDIMM Kit

This 192GB kit contains two 96GB DDR5 6400 registered ECC RDIMMs built for the Supermicro X14SDW-42C-SP9F motherboard. The modules run at 1.1V with CL52 latency and a 2Rx4 rank configuration. They are designed for servers that require registered memory with error correction.

Registered 2Rx4 Architecture

The single specification that decides fit is the registered 2Rx4 DDR5 RDIMM form factor at 1.1V. This motherboard only accepts 288-pin registered ECC modules with this exact rank and voltage; unbuffered UDIMMs or SODIMMs will not be recognised.

Full-Population Stability

Registered buffering offloads the memory controller so every slot runs fully populated at the rated 6400 speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. Verify the board manual for approved DIMM population order before installation.

商品特色

  • 192 GB capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for the Supermicro X14SDW-42C-SP9F
  • Registered ECC architecture with CL52 latency corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank matches the board's exact voltage and timing requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every supported slot

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 6400 MT/s speed run at that rate on my Supermicro X14SDW-42C-SP9F?

The kit is spec-matched to the board's DDR5 6400 memory controller, so the modules will be recognised at their rated 6400 MT/s when installed in the correct slots.

Does the 288-pin RDIMM form factor fit the Supermicro X14SDW-42C-SP9F DIMM slots?

Yes, the 288-pin Registered DIMM is the exact form factor the motherboard requires; it is not a UDIMM or SODIMM and will seat in the standard DDR5 server slots.

What clearance does the 96 GB module need since it has no heat spreader?

Without a heat spreader the modules are low-profile, so they fit in tight server chassis and allow normal airflow from the system fans.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。