暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 256GB 4x64GB CL46 ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-J9FS-BKERB

A 256GB DDR5-5600 ECC registered RDIMM kit built to the Supermicro H14DSG-O-CPU memory controller's exact rank, voltage and timing requirements

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

他に 30点の構成を表示
  • 256 GB total capacity from four 64 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14DSG-O-CPU
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 2Rx4 rank matches the board's memory controller requirements
  • 288-pin DDR5 form factor ensures exact fitment in the target motherboard

Exact-match DDR5 kit

This 256GB kit contains four 64GB DDR5 5600 RDIMMs built to the Supermicro H14DSG-O-CPU memory controller specification. Registered ECC modules with 2Rx4 organisation run at 1.1V CL46 so the server recognises full capacity at rated speed without manual tuning.

Registered ECC stability

Registered buffering offloads the memory controller allowing every slot to stay fully populated at full capacity. On-die ECC corrects single-bit errors in flight preventing silent data corruption and unplanned reboots in production workloads.

256GB headroom

Four 64GB modules fill the board's supported population and deliver 256GB of addressable memory for large databases and virtualisation clusters. Capacity stops at this kit maximum; workloads needing more memory require a platform with higher per-slot limits.

特長

  • 256 GB total capacity from four 64 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14DSG-O-CPU
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 2Rx4 rank matches the board's memory controller requirements
  • 288-pin DDR5 form factor ensures exact fitment in the target motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin DDR5 RDIMMs need any firmware updates or reseating after the server has been running for months?

Registered ECC DDR5 modules are designed for continuous operation; no periodic firmware updates or reseating are required once the kit is installed and recognised by the Supermicro H14DSG-O-CPU board.

What limits sustained throughput first when all four 64 GB modules run at DDR5 5600 CL46?

The memory controller on the Supermicro H14DSG-O-CPU board governs maximum sustained bandwidth; with four 2Rx4 ranks populated the controller reaches its electrical and timing ceiling before the DRAM chips do.

How much heat and power does the 256 GB kit draw at 1.1 V during all-day workloads?

Each module operates at 1.1 V without a heat spreader; total power draw stays within standard DDR5 RDIMM limits and passive airflow in a server chassis keeps temperatures in the normal operating range.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。