暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green circuit boards with black memory chips, no heat spreaders, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM DDR5 5600 64GB 2x32GB CL46 ECC UDIMM memory upgrade

SKU CH-6B2Y-Z3ZY6

64 GB DDR5 ECC UDIMM kit in two 32 GB modules running at 5600 MHz CL46 for Supermicro X14SAE boards

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • 64 GB capacity in a matched 2 × 32 GB kit
  • DDR5 5600 speed rated at PC5-44800 for full bandwidth
  • ECC protection detects and corrects single-bit errors automatically
  • Unbuffered 288-pin UDIMM form factor fits the Supermicro X14SAE board
  • CL46 latency at 1.10 V matches the memory controller spec

Exact-match DDR5 ECC kit

This 64 GB kit delivers two 32 GB DDR5 5600 unbuffered ECC UDIMMs at 1.1 V and CL46. It is built for the Supermicro X14SAE motherboard that requires 288-pin PC5-44800 modules. The dual-rank 2Rx8 layout matches the board's memory-controller expectations.

Workstations needing verified ECC

Suits professionals who need error-correcting memory on a supported Supermicro platform. Not for systems that accept only registered DIMMs, SODIMMs or non-ECC memory. Not for builders whose board limits capacity below 64 GB or requires a different voltage or rank configuration.

Straightforward UDIMM installation

Align the 288-pin modules with the keyed slots and press until the latches click. Follow the motherboard manual for the approved population order. The most common issue is mixing these unbuffered ECC sticks with registered DIMMs or skipping the required slot sequence, which prevents the system from posting.

特長

  • 64 GB capacity in a matched 2 × 32 GB kit
  • DDR5 5600 speed rated at PC5-44800 for full bandwidth
  • ECC protection detects and corrects single-bit errors automatically
  • Unbuffered 288-pin UDIMM form factor fits the Supermicro X14SAE board
  • CL46 latency at 1.10 V matches the memory controller spec

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this kit run at its rated 5600 speed on a Supermicro X14SAE motherboard without manual BIOS tuning?

The kit is spec-matched to the X14SAE DDR5 5600 ECC requirements, so the board's memory controller will recognise the 2Rx8 1.1 V CL46 timings and initialise at full speed automatically.

Can I mix these 2Rx8 32 GB ECC UDIMMs with older 1Rx8 DDR5 ECC modules I already have in the same X14SAE system?

Mixing ranks changes the memory-controller training sequence; the X14SAE manual should be consulted for approved population rules before combining different rank configurations.

How can I verify the ECC function is active after installing the two 32 GB modules?

Enter the BIOS or use a hardware-inventory tool such as dmidecode or CPU-Z; both will report ECC capability as enabled when the 2Rx8 UDIMMs are correctly seated and recognised.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。