暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules, no heat spreader, 288-pin, 96GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 96GB (2x48GB) CL46 1.1V 2Rx8 ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-TYH8-W773S

96 GB DDR5-5600 ECC RDIMM kit built to the Supermicro H14DST-FL's exact rank, voltage and timing requirements

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

他に 30点の構成を表示
  • 96GB kit fills two slots at full capacity with 2x48GB DDR5 modules
  • 5600MHz DDR5 speed delivers rated throughput with CL46 latency and 1.1V operation
  • Registered ECC RDIMM architecture offloads controller and corrects single-bit errors on the fly
  • 288-pin 2Rx8 form factor matches Supermicro H14DST-FL motherboard memory-population rules
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade stability for server workloads

96GB DDR5 ECC RDIMM Kit

This 96GB kit contains two 48GB DDR5 5600 RDIMM modules rated at CL46 and 1.10V. The registered ECC design matches the Supermicro H14DST-FL memory controller so the full capacity is recognised at its rated speed.

Ideal for Supermicro H14DST-FL Servers

The kit suits administrators upgrading a Supermicro H14DST-FL motherboard that requires 288-pin registered ECC memory. Builders needing UDIMM, SODIMM or non-ECC modules should look elsewhere.

Sustained Enterprise Operation

Registered buffering offloads the memory controller so every slot remains stable when fully populated under continuous load. ECC corrects single-bit errors on the fly to prevent silent data corruption during long-running workloads.

特長

  • 96GB kit fills two slots at full capacity with 2x48GB DDR5 modules
  • 5600MHz DDR5 speed delivers rated throughput with CL46 latency and 1.1V operation
  • Registered ECC RDIMM architecture offloads controller and corrects single-bit errors on the fly
  • 288-pin 2Rx8 form factor matches Supermicro H14DST-FL motherboard memory-population rules
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade stability for server workloads

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard slot and DIMM type does this 288-pin DDR5 RDIMM kit require to work?

It installs in 288-pin DDR5 RDIMM slots on the Supermicro H14DST-FL motherboard; the registered form factor is required, not UDIMM or SODIMM.

Can I mix these 48 GB 2Rx8 DDR5-5600 CL46 modules with older DDR5 RDIMMs of a different rank or speed on the same board?

The board's memory-population rules decide; matching rank, voltage (1.1 V), and timing (CL46) across all populated slots avoids down-clocking or boot failures.

How do I confirm the kit is running at DDR5-5600 with ECC active after installation?

Check BIOS or OS tools for 5600 MT/s speed, CL46 latency, 1.1 V voltage, and ECC-enabled status on both 48 GB modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。