暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM sticks, no heat spreaders, 288-pin, 96GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 96GB 2x48GB ECC RDIMM CL46 1.1V Supermicro H14DSG-O-CPU

SKU CH-2RHM-ZB3TG

DDR5 5600 ECC registered RDIMM kit, 96 GB (2×48 GB) CL46 1.1 V, validated for Supermicro H14DSG-O-CPU

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

他に 30点の構成を表示
  • 96 GB capacity in a 2 x 48 GB kit for high-density server workloads
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement
  • Verified fit for Supermicro H14DSG-O-CPU with 288-pin RDIMM form factor

96 GB DDR5-5600 ECC RDIMM kit for Supermicro

This 96 GB kit contains two 48 GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro H14DSG-O-CPU motherboard. Each module runs at 1.10 V with CL46 latency and a 2Rx8 organisation. The 288-pin Registered design matches the board’s memory-controller requirements so the full capacity is recognised at rated speed.

Suited for servers needing maximum registered ECC

This kit suits administrators upgrading a Supermicro H14DSG-O-CPU platform to its full 96 GB registered ECC limit. Builders who need unbuffered UDIMMs, SODIMM form factors, lower-density modules, or non-ECC memory should look elsewhere because this product is exclusively a 2Rx8 Registered DDR5 RDIMM pair.

DDR5-5600 2Rx8 Registered ECC at 1.10 V

The decisive specification is the DDR5-5600 2Rx8 Registered ECC configuration operating at 1.10 V with CL46 timing. Only motherboards that accept 288-pin DDR5 RDIMMs with this exact rank, voltage and latency profile will initialise the kit at its rated 5600 MT/s speed and full 96 GB capacity.

特長

  • 96 GB capacity in a 2 x 48 GB kit for high-density server workloads
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement
  • Verified fit for Supermicro H14DSG-O-CPU with 288-pin RDIMM form factor

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 288-pin DDR5 RDIMM kit work in my Supermicro H14DSG-O-CPU motherboard?

Yes, the kit is verified for the Supermicro H14DSG-O-CPU and uses the 288-pin registered RDIMM form factor that board requires.

Can I populate all memory slots with these 2Rx8 48 GB modules?

Registered architecture offloads the memory controller so every slot can run fully populated at the rated DDR5 5600 speed.

How do I confirm the kit is running at DDR5 5600 CL46 after installation?

Check the BIOS or UEFI memory information screen — it should show 5600 MT/s, CL46 timings, 1.1 V and the full 96 GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。