暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 1.5TB (12x128GB) CL46 1.1V 2Rx4 Supermicro H14DST-FL memory upgrade

SKU CH-VRYN-WYE6Y

1.5 TB DDR5-5600 ECC registered kit with twelve 128 GB modules at CL46 and 1.1 V for Supermicro H14DST-FL servers

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

他に 30点の構成を表示
  • 5TB capacity with twelve 128GB modules maximises server memory density
  • DDR5 5600 speed rated at CL46 latency delivers specified throughput
  • Registered ECC architecture corrects single-bit errors for production stability
  • 1V operating voltage matches platform power requirements exactly
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL memory slots

1.5 TB DDR5 ECC RDIMM kit for Supermicro H14DST-FL

This 1.5 TB kit contains twelve 128 GB DDR5 5600 registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DST-FL memory controller expects. It is intended for administrators who need maximum supported capacity on this specific motherboard.

Verify motherboard population rules

Consult the Supermicro H14DST-FL manual for approved DIMM population order and maximum capacity per channel before ordering. The board requires 288-pin registered RDIMMs; UDIMM or SODIMM modules will not fit or function.

Registered ECC design

The 2Rx4 registered architecture offloads the memory controller so all twelve slots can run fully populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. Modules operate at 1.1 V with no heat spreader.

特長

  • 5TB capacity with twelve 128GB modules maximises server memory density
  • DDR5 5600 speed rated at CL46 latency delivers specified throughput
  • Registered ECC architecture corrects single-bit errors for production stability
  • 1V operating voltage matches platform power requirements exactly
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL memory slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the kit include all twelve 128 GB modules, or must any DIMMs be purchased separately?

The package contains twelve 128 GB DDR5 RDIMMs, giving 1.5 TB in a single kit; no additional modules are required.

Should I select a different capacity or rank for the Supermicro H14DST-FL, or is this 1.5 TB 2Rx4 kit the correct match?

The kit matches the board's required 288-pin registered ECC DDR5-5600 2Rx4 specification at 1.1 V CL46, so it is the exact fitment for full-capacity operation.

Will the memory run at the advertised 5600 MT/s CL46 once installed in the H14DST-FL, or does it drop to a lower speed?

Because the modules are spec-matched to the motherboard's memory-controller requirements — registered ECC, 2Rx4, 1.1 V, CL46 — the server will recognise the full 1.5 TB at the rated DDR5-5600 speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。