暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six green 288-pin DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 576GB 6x96GB CL46 1.1V Supermicro H14DSG-OM memory upgrade

SKU CH-NRCN-CY4YE

576 GB kit of six 96 GB DDR5 5600 CL46 ECC registered RDIMMs at 1.1 V for Supermicro H14DSG-OM

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

他に 30点の構成を表示
  • 576 GB total capacity lets you fill every slot on the Supermicro H14DSG-OM
  • Registered ECC design corrects single-bit errors and offloads the memory controller for stable full-population operation
  • DDR5 5600 (PC5-44800) speed matches the board's rated frequency so modules run at spec
  • 10 V operating voltage and CL46 latency meet the exact timing the memory controller expects
  • Six 96 GB 2Rx4 288-pin RDIMMs supplied as a matched kit for verified fitment

Exact-match DDR5-5600 ECC RDIMM kit for Supermicro

This 576 GB kit contains six 96 GB Registered DIMMs built to the DDR5-5600 (PC5-44800) standard. Each module runs at 1.1 V with CL46 latency and a 2Rx4 organisation. The 288-pin RDIMM form factor matches the slots on the Supermicro H14DSG-OM motherboard so the full capacity is recognised at rated speed.

Thermals noise and power draw

Registered buffering reduces electrical load on the memory controller when all slots are populated, helping the server maintain stable operation under sustained workloads. The modules operate at the standard 1.1 V DDR5 voltage without a heat spreader, relying on the chassis airflow provided by the Supermicro platform. ECC circuitry corrects single-bit errors on the fly to prevent silent data corruption.

What the kit changes

Populating every slot with matched 96 GB RDIMMs delivers the maximum supported capacity in a single validated kit, eliminating the guesswork of mixing modules. The registered architecture allows the memory controller to drive the full population at the rated 5600 MT/s without down-clocking. Buyers who need a different capacity, a UDIMM form factor, or non-ECC memory should look elsewhere.

特長

  • 576 GB total capacity lets you fill every slot on the Supermicro H14DSG-OM
  • Registered ECC design corrects single-bit errors and offloads the memory controller for stable full-population operation
  • DDR5 5600 (PC5-44800) speed matches the board's rated frequency so modules run at spec
  • 10 V operating voltage and CL46 latency meet the exact timing the memory controller expects
  • Six 96 GB 2Rx4 288-pin RDIMMs supplied as a matched kit for verified fitment

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the six 96GB DDR5 5600 RDIMMs in my Supermicro H14DSG-OM and which step do people get wrong?

Power down, open the chassis, and insert each 288-pin module into the slots listed in the motherboard manual following the exact population order; the step most often missed is skipping the prescribed sequence, which prevents the 576GB kit from being recognised at full speed.

What maintenance or replacement will this 6x96GB DDR5 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; the registered ECC design corrects single-bit errors automatically, and if a module ever fails the lifetime replacement warranty covers a direct swap of the affected 96GB stick.

What limit appears first when the 576GB DDR5 5600 CL46 kit runs sustained workloads?

The CAS latency of CL46 at 1.1V sets the timing boundary; under continuous load the memory controller hits this latency ceiling before any thermal or voltage threshold becomes a factor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。