暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM sticks, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 256GB (4x64GB) 5600MHz CL46 1.1V 2Rx4 Supermicro H14DSG-OD

SKU CH-H0EH-91JZ1

256 GB DDR5 ECC RDIMM kit with four 64 GB modules running at 5600 MHz CL46 and 1.1 V for Supermicro H14DSG-OD servers

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

他に 30点の構成を表示
  • 256 GB total capacity across four 64 GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OD compatibility

256 GB DDR5 ECC RDIMM kit for Supermicro H14DSG-OD

This 256 GB kit contains four 64 GB DDR5 registered DIMMs built for the Supermicro H14DSG-OD motherboard. Each module is a 288-pin RDIMM with ECC and registered buffering. The kit targets server administrators who need the exact capacity and rank configuration their platform requires.

2Rx4 rank and 1.10 V at DDR5-5600 CL46

The memory runs at DDR5 5600 (PC5-44800) with CAS latency 46 at 1.10 volts. The 2Rx4 organisation matches the board’s memory-controller expectations so all four slots operate at the rated speed. Using modules with a different rank structure or voltage would prevent the system from booting at full capacity.

Suits admins populating every slot on a validated

Buyers who need a different total capacity, a UDIMM form factor, or non-ECC memory should look elsewhere. The kit is qualified only for the listed Supermicro platform and its documented population rules.

特長

  • 256 GB total capacity across four 64 GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OD compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 5600MHz speed mean once the kit is installed in a Supermicro H14DSG-OD?

The modules run at the rated DDR5-5600 transfer rate with CL46 latency and 1.1V voltage, so the memory controller recognises the full 256GB capacity at its specified speed without manual tuning.

How does the registered ECC design affect bandwidth and error handling on this board?

Registered buffering reduces electrical load on the memory controller, allowing all four slots to operate at full DDR5-5600 bandwidth, while on-die ECC detects and corrects single-bit errors in real time to prevent silent data corruption.

Will the 288-pin RDIMM form factor and 2Rx4 rank layout fit the H14DSG-OD memory slots?

Yes, the kit uses the exact 288-pin DDR5 RDIMM form factor and 2Rx4 rank organisation the motherboard requires, matching its population rules for a four-module installation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。