暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM MR25600-2584K8 2TB (8x256GB) DDR4 3200 CL22 ECC RDIMM memory upgrade

SKU CH-2733-GCE4E

Eight 256 GB DDR4 registered ECC RDIMMs run at 3200 MT/s with CL22 latency and 1.2 V for Supermicro X12DPL motherboards

  • Capacity2TB (8 x 256GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 2TB 8X256GB

  • 2TB total capacity from eight 256GB modules for maximum server density
  • DDR4 3200 speed rated at CL22 latency for responsive data access
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • 20V operation matches platform voltage requirements for stable full-population use
  • Spec-matched for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards for verified fitment

2 TB DDR4-3200 ECC RDIMM kit

This 2 TB kit contains eight 256 GB DDR4-3200 registered ECC RDIMMs built for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards. The modules run at 1.2 V with CL22 timing and an 8Rx4 rank structure that matches the board's memory controller expectations. It is intended for administrators who need maximum supported capacity in every slot.

Replaces lower-capacity or mixed-rank DIMMs

A jump to this kit is worth it when the server must run fully populated at the full 2 TB limit without down-clocking or population restrictions. It is not for systems that only accept UDIMM or SODIMM form factors, or for builds that cannot use registered ECC memory.

288-pin RDIMM installs in standard server slots

Installation follows the motherboard's documented population order; the registered buffer reduces electrical load so all twelve slots can be filled at rated speed. The most common issue is ignoring the manual's slot sequence, which prevents the system from recognising the full capacity.

特長

  • 2TB total capacity from eight 256GB modules for maximum server density
  • DDR4 3200 speed rated at CL22 latency for responsive data access
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • 20V operation matches platform voltage requirements for stable full-population use
  • Spec-matched for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards for verified fitment

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-2584K8
Capacity2TB (8 x 256GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank8Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content2TB 8X256GB DDR4 3200MHz PC4-25600 8Rx4 1.2V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin RDIMM modules fit the DIMM slots on a Supermicro X12DPL-NT6 or X12DPL-i6 motherboard?

Yes, the 288-pin Registered RDIMM form factor matches the slots on those Supermicro boards. UDIMM or SODIMM modules would not fit or function.

What population order should I follow when installing all eight 256GB modules on the X12DPL-NT6 or X12DPL-i6?

Consult the motherboard manual for the approved DIMM population sequence. The board's memory-controller rules dictate which slots must be filled first for full 2TB recognition.

How long is the replacement coverage for this 2TB DDR4 3200 kit?

The kit carries a lifetime replacement warranty with free US-based technical support for the duration of ownership.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。