暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR5 RDIMM module with black chips on both sides no heat spreader 288 gold pins

NEMIX RAM

NEMIX RAM MR51200-9624K1 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM X14SDV-36C-SP3F memory upgrade

SKU CH-K2P4-693DZ

96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM built for Supermicro X14SDV-36C-SP3F servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96 GB capacity handles heavy server workloads with 96 GB DDR5
  • 6400 MT/s speed matches the board's rated DDR5-6400 data rate
  • CL52 latency and 1.1 V voltage meet the controller's exact timing spec
  • Registered ECC architecture corrects single-bit errors while buffering every slot
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36C-SP3F motherboard precisely

Server DDR5 upgrade for Supermicro X14SDV

This 96GB DDR5 6400 registered ECC RDIMM is built to match the Supermicro X14SDV-36C-SP3F motherboard. It delivers the exact rank, voltage and timing the memory controller expects for full-capacity operation. The 2Rx4 organisation and 1.1V supply suit enterprise workloads that demand error correction and stable throughput.

Verify board population rules before ordering

Consult the motherboard manual for supported capacities, approved DIMM population order and installation steps. The module uses a 288-pin registered form factor that the board requires; it will not work in UDIMM or SODIMM slots. Confirm the server's maximum memory per slot and total capacity to avoid an incompatible configuration.

Registered ECC design runs at rated speed

The registered architecture offloads the memory controller so every populated slot operates at DDR5 6400 with CL52 latency. ECC corrects single-bit errors on the fly to prevent silent data corruption. The modules carry no heat spreader, so chassis airflow must be sufficient for continuous server duty.

特長

  • 96 GB capacity handles heavy server workloads with 96 GB DDR5
  • 6400 MT/s speed matches the board's rated DDR5-6400 data rate
  • CL52 latency and 1.1 V voltage meet the controller's exact timing spec
  • Registered ECC architecture corrects single-bit errors while buffering every slot
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36C-SP3F motherboard precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the kit include all 96GB in a single 288-pin RDIMM or do I need to buy additional modules?

The package content lists one 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V CL52 288-pin ECC RDIMM kit, so the full capacity arrives in a single registered module.

Why is this MR51200-9624K1 specified as 2Rx4 CL52 rather than a different rank or latency?

The Supermicro X14SDV-36C-SP3F motherboard expects DDR5 6400 registered ECC with exactly 2Rx4 organization and CL52 timing; this part matches those specs so the memory controller recognises the full 96GB at rated speed.

What does the 6400 MT/s rating deliver once the RDIMM is installed in the X14SDV-36C-SP3F?

The module runs at DDR5 6400 (PC5-51200) with 1.10V and CL52, giving the server's memory controller the precise bandwidth and latency it was validated for when all slots are populated.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。